Author Topic: space invaders lock up  (Read 1115 times)

0 Members and 1 Guest are viewing this topic.

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: space invaders lock up
« on: November 10, 2016, 10:51:15 PM »
If you have to power the game off and on then the problem is fixed by resetting the CPU board. I think that you may have an issue with ROM / RAM or CPU socketed ICs. See if the game locks up / freezes when you lightly push socketed ICs on the CPU board, or jiggle the connectors on the CPU board. Is there any corrosion on the CPU board ? Check the bottom LHS connector.

When the game freezes - check the voltages at the CPU board (+5V and +12V Test points) - If they are good, then it will be the CPU board. Is is an original or after market ?
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia