The Aussie Pinball Arcade
Aussie Pinball Forums => Technical Matters => Pinball Repairs / Problems & Assistance => Topic started by: Pinballrocks on October 05, 2021, 08:42:25 PM
-
HI All,
Im working on my Eight Ball Champ.
The drop target in front of the G target does not re-set.
I have cleaned the switch contacts, replaced the diode and the coil and still no luck.
What should i look at next??
Cheers
-
Does it reset at the start of the game or ball ? Does it work during self test ? Is there 43VDC at both lugs of the coil ?
-
No it wont reset at start of game or when going through self test.
I dont know about the voltage to coil?