The Aussie Pinball Arcade

Aussie Pinball Forums => Restorations => Topic started by: morgo on December 03, 2015, 01:00:37 AM

Title: Painting insert outlines
Post by: morgo on December 03, 2015, 01:00:37 AM
hi all,
         somewhere in resto threads I`ve read about being able to buy stick on templates which allow you to paint the outlines of inserts, then remove . But I cant seem to find the right thread again.
 What do people use to get a good clean outline on their inserts ?
 If using this type of mask for painting , where do you get them from?
thanks,
           morgo
Title: Re: Painting insert outlines
Post by: oldpins on December 03, 2015, 06:35:58 AM
Hi Morgo,

Here is a link to my website, scroll down to the bottom of the page. I can custom cut to the outer diameter of inserts and black line . The material is a low tack masking vinyl (blue).

http://www.oldpinballs.com/store.html (http://www.oldpinballs.com/store.html)

Greg
Title: Re: Painting insert outlines
Post by: morgo on December 03, 2015, 05:10:29 PM
thanks greg,
                  this is exactly what I was after. will contact you soon with sizes and quantity.



morgo