The Aussie Pinball Arcade

Aussie Pinball Forums => General Discussion => Your Collection => Topic started by: Steevsee on May 17, 2023, 09:31:18 PM

Title: Need to order some replacement parts.
Post by: Steevsee on May 17, 2023, 09:31:18 PM

Managed to play quite a few games on Cueball Wizard which was very satisfying.


Also managed to play a couple of games on Baywatch before the ball got stuck on a broken piece of plastic post.  Had already cleared many pieces of this same plastic from the playfield as it seems to have become brittle over time.


Lastly played one ball on Jurassic Park before the ball got stuck on a rubber ring which was one size too big on the slingshots. @.@

Title: Re: Need to order some replacement parts.
Post by: Steevsee on May 17, 2023, 09:37:33 PM

Also forgot how to post here. @@^

Should have replied to my earlier post rather than post a new topic.

I'm sure it will all come back to me.

Title: Re: Need to order some replacement parts.
Post by: Strangeways on May 20, 2023, 09:52:39 AM

What's going on with the top photo ? Something weird blocking the ball ? Bottom photo - yep the rubber is too big. Sometimes you can stretch the rubber between the two posts, but the slack will look stupid in front of the sling switches.