The Aussie Pinball Arcade
Aussie Pinball Forums => Technical Matters => Topic started by: Pinballrocks on July 30, 2021, 08:46:31 PM
-
Hi all,
I have just had my Williams flash CPU boards repaired and they are all good now.
The machine boots up and i press the start button all is good as soon as I activate any of the flippers they drop and I lose all power.
I turn the machine off and restart and the same thing happens.
Any Ideas on where to look for the problem would be greatly appreciated???
Thanks Paul.
-
Check the 5 volts on the CPu make sure it’s 5v if that’s ok check the diodes on the flipper coils
Sent from my iPhone using Tapatalk
-
Thanks mate.
I will check it out tomorrow. *%*
-
Thanks for your advise Daniel,
The switch contacts had some issues but its working well now.
Cheers ^^^
-
Excellent
Sent from my iPhone using Tapatalk