The Aussie Pinball Arcade

Aussie Pinball Forums => Restorations => Topic started by: ktm450 on December 30, 2009, 11:15:24 AM

Title: High Speed 2 - The Getaway Restoration Complete
Post by: ktm450 on December 30, 2009, 11:15:24 AM: Well, its a bit flavour of the month so I wont bore you with a step by step on this one, but here is a little background on the machine.

I have owned this machine for about 7 years, it was the second machine I owned, I purchased it from a small business just around the corner from where I used to live, who sited pins locally. I was in there to buy a couple of rubber rings to finish off a restoration of my first pin a 1978 Gottlieb Dragon, I asked if they had any machines for sale and he pointed me in the direction of the HS2, it was the only pin he had double of so he had it for sale !@# anyway a deal was done and I owned my second pin.

So after many years of reliable play it was overdue for a restoration, a couple of other pins pushed thier way into the line first %.% Oh well, after TZ and WH20, HS2 was a piece of piss to shop

So after 7 years it was time for a full strip down....

BEFORE:
As you can see it was in fairly good condition before I started as I had given it a good clean up a few years back, but it was time for the black rubber to go *%*

(http://i1187.photobucket.com/albums/z397/stewart_clan/Williams%20High%20Speed%202%20-%20The%20Getaway/smallRIMG0376.jpg)

(http://i1187.photobucket.com/albums/z397/stewart_clan/Williams%20High%20Speed%202%20-%20The%20Getaway/smallRIMG0378.jpg)
Title: Re: High Speed 2 - The Getaway Restoration Complete
Post by: ktm450 on December 30, 2009, 11:16:44 AM: This is the most commonly broken plastic on a HS2, I have came up for a solution for it shown later.

(http://i1187.photobucket.com/albums/z397/stewart_clan/Williams%20High%20Speed%202%20-%20The%20Getaway/smallRIMG0398.jpg)
Title: Re: High Speed 2 - The Getaway Restoration Complete
Post by: ktm450 on December 30, 2009, 11:17:58 AM: The factory mylar around my pop bumper area was not quite in the correct position when assembled leading to the wear you can see in this pic.

(http://i1187.photobucket.com/albums/z397/stewart_clan/Williams%20High%20Speed%202%20-%20The%20Getaway/smallRIMG0384.jpg)
Title: Re: High Speed 2 - The Getaway Restoration Complete
Post by: ktm450 on December 30, 2009, 11:20:02 AM: STRIPPED:

(http://i1187.photobucket.com/albums/z397/stewart_clan/Williams%20High%20Speed%202%20-%20The%20Getaway/smallRIMG0445.jpg)

(http://i1187.photobucket.com/albums/z397/stewart_clan/Williams%20High%20Speed%202%20-%20The%20Getaway/smallRIMG0446.jpg)

(http://i1187.photobucket.com/albums/z397/stewart_clan/Williams%20High%20Speed%202%20-%20The%20Getaway/smallRIMG0451.jpg)
Title: Re: High Speed 2 - The Getaway Restoration Complete
Post by: ktm450 on December 30, 2009, 11:21:56 AM: Around the pop bumper area I use Magic eraser to remove most of the ball swirl then some very small touch ups, I then lay down some new mylar, same profile as factory but right in closer to the pop bumper body, to prevent any further wear.
The result was not perfect but not noticable standing in front of the machine.

(http://i1187.photobucket.com/albums/z397/stewart_clan/Williams%20High%20Speed%202%20-%20The%20Getaway/RIMG0481a.jpg)
Title: Re: High Speed 2 - The Getaway Restoration Complete
Post by: ktm450 on December 30, 2009, 11:23:40 AM: After a good clean, a few touchups and a good polish...

(http://i1187.photobucket.com/albums/z397/stewart_clan/Williams%20High%20Speed%202%20-%20The%20Getaway/smallRIMG0468.jpg)

(http://i1187.photobucket.com/albums/z397/stewart_clan/Williams%20High%20Speed%202%20-%20The%20Getaway/smallRIMG0469.jpg)

(http://i1187.photobucket.com/albums/z397/stewart_clan/Williams%20High%20Speed%202%20-%20The%20Getaway/smallRIMG0473.jpg)
Title: Re: High Speed 2 - The Getaway Restoration Complete
Post by: ktm450 on December 30, 2009, 11:24:26 AM: For the supercharger entrance plastic, I decided to make a new one from stainless steel, for one this plastic is almost impossible to buy, and another reason, it will just break again eventually, one stray air ball and its cracked again.
The brushed stainless steel matches the theme of the area, a highway signpost over the 'road' leading into the supercharger
I just cut it roughly into shape, then used a very thin angle grinder blade to get it very close and finished off with a hand file and dremel. I then used wet and dry emery paper to rough it up moving in one direction only.

(http://i1187.photobucket.com/albums/z397/stewart_clan/Williams%20High%20Speed%202%20-%20The%20Getaway/smallRIMG0490.jpg)
Title: Re: High Speed 2 - The Getaway Restoration Complete
Post by: ktm450 on December 30, 2009, 11:26:11 AM: BEFORE:

(http://i1187.photobucket.com/albums/z397/stewart_clan/Williams%20High%20Speed%202%20-%20The%20Getaway/smallRIMG0398.jpg)

AFTER:

(http://i1187.photobucket.com/albums/z397/stewart_clan/Williams%20High%20Speed%202%20-%20The%20Getaway/smallRIMG0500.jpg)
Title: Re: High Speed 2 - The Getaway Restoration Complete
Post by: ktm450 on December 30, 2009, 11:28:56 AM: So here is a list of what was done:

-replaced all coil sleves
-replaced all rubbers
-replaced all star posts
-replaced slingshot plastics with NOS
-made plastic protectors for slings
-removed and polished every post and every screw
-a couple of small touchups
-PF completely stripped down cleaned polished and waxed
-new globes
-inserts cleaned from below playfield
-fixed a raised insert
-rebuilt all flippers, new bats, new plungers, links, and pawls. New coil sleeves and flipper bushings
-replaced pop bumper caps
-replaced pop bumper wafers
-New leg levelers
-added 3 new mirror glazed balls
-removed factory mylar with new mylar
-replaced u-turn plastic with NOS
-made new supercharger entrance plastic from Stainless steel
-new cabinet flipper buttons

A few after pics:

(http://i1187.photobucket.com/albums/z397/stewart_clan/Williams%20High%20Speed%202%20-%20The%20Getaway/smallRIMG0511.jpg)

(http://i1187.photobucket.com/albums/z397/stewart_clan/Williams%20High%20Speed%202%20-%20The%20Getaway/smallRIMG0504.jpg)

(http://i1187.photobucket.com/albums/z397/stewart_clan/Williams%20High%20Speed%202%20-%20The%20Getaway/smallRIMG0506.jpg)
Title: Re: High Speed 2 - The Getaway Restoration Complete
Post by: ktm450 on December 30, 2009, 11:29:58 AM: A couple more:

(http://i1187.photobucket.com/albums/z397/stewart_clan/Williams%20High%20Speed%202%20-%20The%20Getaway/smallRIMG0498.jpg)

(http://i1187.photobucket.com/albums/z397/stewart_clan/Williams%20High%20Speed%202%20-%20The%20Getaway/smallRIMG0510.jpg)
Title: Re: High Speed 2 - The Getaway Restoration Complete
Post by: MartyJ on December 30, 2009, 11:44:48 AM: Very nice work indeed. Great looking machine!

I like your supercharger ramp sign mod too!
Title: Re: High Speed 2 - The Getaway Restoration Complete
Post by: Strangeways on December 30, 2009, 05:52:21 PM: Thats one AWESOMELY quick restoration - and the results are stunning. I can't find your touch up, which is good. The playfield is in super condition and has polished up very well. Mod fits the game (well done). I like the placement of the colored sleeves.

You should do more pins ^^^
Title: Re: High Speed 2 - The Getaway Restoration Complete
Post by: ddstoys on December 30, 2009, 06:24:02 PM: Looking good Matt will have to call over to test it out once every thing calms down from the silly season ^^^
Title: Re: High Speed 2 - The Getaway Restoration Complete
Post by: Pinfan on December 30, 2009, 06:32:12 PM: Yep sure does look sweet.... ^^^

Nice work...

I have a soft spot for this title.... Always liked it !
Title: Re: High Speed 2 - The Getaway Restoration Complete
Post by: carbonROD on December 30, 2009, 06:38:50 PM: Very nice! Super clean machine now ^^^
Title: Re: High Speed 2 - The Getaway Restoration Complete
Post by: Strangeways on December 30, 2009, 07:06:35 PM: Quote from: Pinfan on December 30, 2009, 06:32:12 PM
Yep sure does look sweet.... ^^^

Nice work...

I have a soft spot for this title.... Always liked it !

I don't know anyone that dislikes this title. Brilliant game.
Title: Re: High Speed 2 - The Getaway Restoration Complete
Post by: ktm450 on December 31, 2009, 10:09:57 AM: Thanks guys, it is a fantastic game. There have been times when I have considered selling it but I can never do it, it is just such a fast moving game with great loop shots, and whats not to like about a supercharger that accelerates your ball hovering above the PF *%*

Had a good game yesterday, got the jackpot then the superjackpot, then got all three balls in the supercharger lighting it a second time, hit the ramp...
S-U-P-E-R-J-A-C-K-P-O-T

There is something cool about getting all three balls flying around the supercharger for 30 loops, really shakes the machine around ()
Title: Re: High Speed 2 - The Getaway Restoration Complete
Post by: ktm450 on December 31, 2009, 10:11:38 AM: Quote from: ddstoys on December 30, 2009, 06:24:02 PM
Looking good Matt will have to call over to test it out once every thing calms down from the silly season ^^^

No probs mate, I'll organise another Geelong mini meet &&
Forces me to actually clean and wax my other machines %.%
Title: Re: High Speed 2 - The Getaway Restoration Complete
Post by: ktm450 on December 31, 2009, 10:35:17 AM: Quote from: Strangeways on December 30, 2009, 05:52:21 PM

You should do more pins ^^^

I would love to do more pins, just need the money to buy more @.@ *)*