The Aussie Pinball Arcade

Aussie Pinball Forums => Technical Matters => Pinball Repairs / Problems & Assistance => Topic started by: pinwaz on January 20, 2013, 07:32:17 PM

Title: gi playfield wh20 problem
Post by: pinwaz on January 20, 2013, 07:32:17 PM

top string of playfield GI in my wh20 keeps blowing fuse after a minute or so !@
Have check for shorts and changed all globes,check for cold solders on board and connecter has been checked,maybe triac? or use a slow blow?

Title: Re: gi playfield wh20 problem
Post by: beaky on January 21, 2013, 02:43:32 AM

as per other thread all wpc G.I fuses should be slo blo 5 amp

Title: Re: gi playfield wh20 problem
Post by: pinwaz on January 21, 2013, 03:03:31 AM

Quote from: beaky on January 21, 2013, 02:43:32 AM

as per other thread all wpc G.I fuses should be slo blo 5 amp

Yeah thanks beaky,was using s b 3amp !@#