Black Knight coil wiring, Help Wanted

[PinPal]

I need sum help with the wiring on my Black Knight coil assembly.
Got a complete assembly from Pinball Spare parts as I had a problem with flipper not energizing properly.
After replacing switch linkages and even the coil I still had the same problem.
Now with a complete new assembly the problem still there.  
The two wires that are off, these where both originally soldered to the far left lug in the picture.

I need a picture of the wiring Lower Left Flipper coil on a Black Knight so I can check to see if that is the problem.

Thank you,,

Pinpal......

[PinPal]

Was the old assembly that I changed the parts not the new assembly   

[PinPal]

Problem solved, end of stroke switch just needed a slight ajustment and the wiring was right all along

Pinpal...