The Aussie Pinball Arcade
Aussie Pinball Forums => Pinball Trader => Pinballs wanted => Topic started by: RottyGuy on September 07, 2009, 06:06:37 PM
-
What is the average price for a Grand Prix pinball ? There doesn't seem to be too
many around to compare prices. Does anyone here own one ?
I had a list of three pins that i thought were my favourite and i was going to buy
one of the three, but that was until i played a Stern Grand Prix a few weeks ago.
Thought it was great. Loved the sound, the speed and even the look.
Just think they might be out of my price range from what i've seen so far.
-
I've generally seen them go for close to $5k. I think playwise its not a bad machine at all. Similar to HS2.
It gets some mixed reviews but if you play and you like it, then go for it..
The one on Ebay last week (which I got snipped at the last minute on) went for around $3400 which was cheap.
-
4 - 5K?
Speaking for myself. If i was going to outlay that kinda coin, i'd get a TSPP over a GP.
-
4 ish k would be a good price for a done up one
the one we had on ebay was unshopped for 3400.00
we are doing another one up at the moment
mark
-
MarkC sold one in June (as is) for $2425 - his latest one (also as is) went for $3410 (both had been shopped 6 months prior).
I would expect to get one for $3k - $4k given those prices.
-
I know of one for sale - asking price $4500 - $5000
-
The one i played here in Brisbane has a asking price of $5500.
It's very nice, but a lot more than i would pay.
I would've thought for a late model like a GP they wouldn't need
too much refurbishment.
ajlaird - I forgot all about that one. I bid on it myself.
I had a bid on Marks one last week, but i gave up because i was unsure
how much a new display would set me back, plus it was listed as one of
the hire machines. I would've been bidding without knowing when to stop.
Retropin - is that price from a dealer or private sale ?
Mark - i'll keep a watch on your website
It's a good time to be buying, there's so many options out there.
-
The one i played here in Brisbane has a asking price of $5500.
It's very nice, but a lot more than i would pay.
I would've thought for a late model like a GP they wouldn't need
too much refurbishment.
ajlaird - I forgot all about that one. I bid on it myself.
I had a bid on Marks one last week, but i gave up because i was unsure
how much a new display would set me back, plus it was listed as one of
the hire machines. I would've been bidding without knowing when to stop.
Retropin - is that price from a dealer or private sale ?
Mark - i'll keep a watch on your website
It's a good time to be buying, there's so many options out there.
Your're not wrong. Lots of containers coming in, LOTS of parts. Good news for everyone.
-
The one i played here in Brisbane has a asking price of $5500.
It's very nice, but a lot more than i would pay.
I would've thought for a late model like a GP they wouldn't need
too much refurbishment.
ajlaird - I forgot all about that one. I bid on it myself.
I had a bid on Marks one last week, but i gave up because i was unsure
how much a new display would set me back, plus it was listed as one of
the hire machines. I would've been bidding without knowing when to stop.
Retropin - is that price from a dealer or private sale ?
Mark - i'll keep a watch on your website
It's a good time to be buying, there's so many options out there.
Is private sale - machine in superb condition.. let me know if you want me to make enquiries whether its still up for sale or not
-
i think more containers of parts than pins at the moment ,
not as many pins containers coming in as last year from what I hear
mark
-
Set yourself a budget and keep looking - it will depend on if you want something that needs a bit of TLC or is great straight off the bat. If a machine has come straight off site it will need a good clean (say $30 for cleaner), new rubbers (around $35) and possibly replacement of a few plastics ($?). If the operator has been on the ball then it should be all working.
DMDs tend to cost around the $250 mark.
Personally, to date I have tended towards machines with good to very good condition playfields; saves a lot of work later. Plastics can be replaced cheaply enough, as can target decals; cabs can be redecalled if required; backglasses and translites can be found at a reasonable price, but replacement playfields are never cheap.
-
I have one in mint condition,
sorry not for sale, 100% keeper, I paid between $3,500 to $4,000 for mine, which is a fair price, as I've seen them sell for more, however very few here in australia, bloody great pin in my opinion
-
I have one in mint condition,
sorry not for sale, 100% keeper, I paid between $3,500 to $4,000 for mine, which is a fair price, as I've seen them sell for more, however very few here in australia, bloody great pin in my opinion
Sounds good.
As much as i like the game, i'm not prepared to pay the $5000-$5500 price mark that the two i've seen are asking.
I'm looking at a couple of other pins this week, just a shame i won't get the one i like the best.
-
Remember that this pinny was called nascar in the us.
I'm not 100% but i think i saw bike city warehouse advertise one on ebay that didn't sell for $5250 Can you really buy a simpsons pinball party for 5k i've looked and everyone has wanted 7k +
-
ebay is not always the best way to judge prices
sure we clear stock on there and to be honest we had 4 grand prix at one stage
prices will be different from state to state and showroom to showroom
and from one month on ebay to the other
simpsons are funny , still very much in demand , had held its price . I know of other dealers paying 5k for them then to rebuild and sell
mark
-
Any GP's coming in your next containers Mark ?
-
have one in stock now and will be listed very soon
mark
-
Is that an auction or fixed price Mark ?
-
here's my post on my grand prix pin
http://aussiepinball.com/index.php?topic=2365.0
cheers
v8racefan
-
Thanks for posting that link.
-
3k
-
Is that an auction or fixed price Mark ?
will be a ebay auction when ready unless sold before
pm me and I can send pictures once ready
mark
-
Sent PM yesterday.
-
PM
whats thats
lol ok better check
-
just started putting it back together
check your pms later re answers
mark
-
PM
whats thats
lol ok better check
Sorry, forgot you prob. have 100's of others PMs.
-
PM
whats thats
lol ok better check
Sorry, forgot you prob. have 100's of others PMs.
mate with all the deals I have a couple
beaky ...........
nah its all good
mark
-
Did you get the GP back together yet Mark ?
-
finished today
-
finished today
It looked VERY nice when I had a look on Sat Mark. I suspect it would have finished up very clean. Shame I couldn't have had a game on it!
Is the gameplay any different with the Nascar ROMS?
-
finished today
Can you PM the price when you're ready Mark.
-
will do tomrorow
mark
-
hey mark I have some questions re: the test car that pops up from the playfield on this pin?? !@#
can you or one of your techs help
thanks in advance
Your GP has cleaned up well, the artwork on the playfield is magic, best of luck with the sale mate, pins in this condition don't last long
cheers
v8racefan
-
hey mark I have some questions re: the test car that pops up from the playfield on this pin?? !@#
can you or one of your techs help
thanks in advance
Your GP has cleaned up well, the artwork on the playfield is magic, best of luck with the sale mate, pins in this condition don't last long
cheers
v8racefan
drop me a pm or call
mark
-
How have you found your GP, reliability wise, V8racefan ?
Has it been ok in general apart from the current problem ?
-
very very reliable, the new sterns are very well built. This is the 1st and only stern pinball I've owned, and I must say I'm very pleased with both the quality, artwork and reliability.
The minor maintenance issue i have at the moment is with a micro switch, which do wear out from time to time, easy fix.
I just can't say anything bad about this pin, it ticks all the boxes for this pinhead. Hope this helps.
-
very very reliable, the new sterns are very well built. This is the 1st and only stern pinball I've owned, and I must say I'm very pleased with both the quality, artwork and reliability.
The minor maintenance issue i have at the moment is with a micro switch, which do wear out from time to time, easy fix.
I just can't say anything bad about this pin, it ticks all the boxes for this pinhead. Hope this helps.
Just put the question to you because a local tech i had out to repair my Shadow a few weeks ago
said in his opinion i'd be better to avoid the late model pins and stick to the 90's Williams/Bally.
Everyone has their own opinion.
Personally i liked the GP i played a few weeks ago up here, but not worth $5500.
-
Decision time for me. I have the GP photos from Mark today.
It's always difficult to buy sight unseen, but it does look like it's come
up nice judging by the photos.
-
The best part about dealing with mark is if its crap he tells you its crap ^^^
-
The best part about dealing with mark is if its crap he tells you its crap ^^^
thanks mate
anyone is welcome to pop in adn look at the GP and do a write up
mark
-
anyone is welcome to pop in and look at the GP and do a write up
mark
That's a great idea.
So who would be willing to do me a favour and take a look at the GP before i commit ? Anyone ?
Or does this come across as though i don't trust Marks description/photos ? !@)
I will say that i bought a pinball from Mark 3 months ago and was happy enough.
-
Or does this come across as though i don't trust Marks description/photos ? !@)
I think that's a reasonable request for your own peace of mind. I'm sure someone located close to Mark will put their hand up ^^^
-
great idea for the write up #*#
-
no offence is taken , anyone is welcome to come see it
i dont have a problem
I stand behind the work my techs do
if there is a problem I will do my best to fix it
mark
-
Anybody visiting Childs/PSP this week who would be kind enough
to take a look at the GP for me ?
-
PM
whats thats
lol ok better check
Sorry, forgot you prob. have 100's of others PMs.
mate with all the deals I have a couple
beaky ...........
nah its all good
mark
Hey It's the only way to get you to reply you slacker!!! Remember how long it took for you to send my lamps for fire? and how many times it took for you to get it right? And how about....
It's all good. I won't bother you as much now anyway. especially now that you sold the pin i have been wanting for 20 years to own to caveman. && #@# LOL
P.S. P.M. sent %.% <.> %.% <.>
-
Anybody visiting Childs/PSP this week who would be kind enough
to take a look at the GP for me ?
I popped down today and had a quick look over the game. Unfortunately I don't own any Stern pins so I've got no idea where to look re problems with PCB's etc...The playfield looks very clean, I didn't see any major (or minor) issues. I didn't have time for a game, but I will be back in a couple of weeks so happy to give it a spin for you then.
-
I popped down today and had a quick look over the game. Unfortunately I don't own any Stern pins so I've got no idea where to look re problems with PCB's etc...The playfield looks very clean, I didn't see any major (or minor) issues. I didn't have time for a game, but I will be back in a couple of weeks so happy to give it a spin for you then.
Hey Marty,
How was the overall condition of the cabinet ? As far as scratches and dings go.
Thanks.
-
I didn't get my head around the whole thing (machines either side)...I don't remember any big 'tags' or dings, but I was mainly concentrating on the playfield sorry! !@) I'll double check it when I go back down.
-
No worries.
Thanks for the input Marty.
-
PM
whats thats
lol ok better check
Sorry, forgot you prob. have 100's of others PMs.
mate with all the deals I have a couple
beaky ...........
nah its all good
mark
Hey It's the only way to get you to reply you slacker!!! Remember how long it took for you to send my lamps for fire? and how many times it took for you to get it right? And how about....
It's all good. I won't bother you as much now anyway. especially now that you sold the pin i have been wanting for 20 years to own to caveman. && #@# LOL
P.S. P.M. sent %.% <.> %.% <.>
hmmm no coment ...... yes I have been slow i must say
sorry
-
The GP is on ebay now, finishing tonight.
I've had my final bid, doubt i'll win it though.
-
The GP sold for $3500 . Beat me by $120.
-
great price for a late model stern
-
^^ I guess it was.
If i see another one come up on ebay, i'll have another go.
-
3500 seems the rate for good ones
last 3 we sold around 3500-4000
happy they have all gone now
whats next ...
-
3500 seems the rate for good ones
last 3 we sold around 3500-4000
happy they have all gone now
whats next ...
That's the million $ question