« previous next »
Pages: 1 2 [3] 4   Go Down

Author Topic: SLACK transport company  (Read 1097 times)

0 Members and 1 Guest are viewing this topic.

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Geelong
Re: SLACK transport company
« Reply #30 on: March 30, 2009, 03:58:05 PM »
Ask the depo for some pallet wrap and wrap it up then sit it on some blocks should be fine ive picked up a few in the rain using pallet wrap and never had a problem.  Ask duck man for advice on wrapping he is the pallet wrap king lol
Logged

Offline beaky

  • Trade Count: (+7)
  • ******
  • Forum Posts:
    • Melbourne, Vic
Re: SLACK transport company
« Reply #31 on: March 31, 2009, 12:08:29 AM »
well it rained when i picked up lah but we pallet wrapped it and tarped it,
it pi##ed down on the way home with lah but not a drop got threw.
then on the way to brisbane it lightly showered, but after i picked up pb and tarped + it was already pallet wrapped. no rain  @@*
i then went and picked up the jokerz, no rain. loaded it up and tarped it, no rain  all the way home, #*#
there was rain in the distance but when i got to where it was it had moved on ^^^.
even though the traffic was hectic and it took me from 10:30 am till 6:30 pm it was worth it.
the pinbot needs a complete over hall, and i need to source some parts i did buy it as a project pin so ive got no complaints.
well that was my fun day.
« Last Edit: March 31, 2009, 01:57:01 AM by Beaky »
Logged
On site pinball repairs in MELBOURNE NTH SUBURBS  : Circuit board repairs and refurbishing Australia wide (via Aust post)

Offline ajlaird

  • Trade Count: (0)
  • ******
  • Forum Posts:
    • Greensborough, Melbourne
  • Go Ahead, Make My Day
Re: SLACK transport company
« Reply #32 on: March 31, 2009, 01:00:59 AM »
Phew, what a day! But it is always fun picking up pins even if it did take all day.
Logged

Offline beaky

  • Trade Count: (+7)
  • ******
  • Forum Posts:
    • Melbourne, Vic
Re: SLACK transport company
« Reply #33 on: March 31, 2009, 01:58:21 AM »
yep i'm stuffed alright.
but it was all worth it in the end.
Logged
On site pinball repairs in MELBOURNE NTH SUBURBS  : Circuit board repairs and refurbishing Australia wide (via Aust post)

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Geelong
Re: SLACK transport company
« Reply #34 on: March 31, 2009, 06:27:04 AM »
Good job. You have to love oversized glad wrap lol
Logged

Offline Geoffh

  • Trade Count: (0)
  • ****
  • Forum Posts:
    • Melbourne Vic
Re: SLACK transport company
« Reply #35 on: March 31, 2009, 09:39:09 PM »
Glad it finally arrived beaky.

Did they wrap it so nothing went missing?

Well have fun with your project

Logged

Offline beaky

  • Trade Count: (+7)
  • ******
  • Forum Posts:
    • Melbourne, Vic
Re: SLACK transport company
« Reply #36 on: March 31, 2009, 10:20:16 PM »
Quote from: Geoffh on March 31, 2009, 09:39:09 PM
Glad it finally arrived beaky.

Did they wrap it so nothing went missing?

Well have fun with your project


it was wrapped very vell thankyou.
it hadn't been tampered with.
i sent mark an email about the #1683 lamps, they were the wrong ones.
i don't know if the wrong ones were sent or there are 2 types of lamp with the same number.
would it be better to send you a copy of the email?
there are photos of the page of the manual where i got the part number from + the lamps i was sent and the lamp i need.
Also i do need a few parts for the pinbot, can i email you a list of parts for a quote and availability of these or is it best to wait till mark gets back?
« Last Edit: March 31, 2009, 10:27:24 PM by Beaky »
Logged
On site pinball repairs in MELBOURNE NTH SUBURBS  : Circuit board repairs and refurbishing Australia wide (via Aust post)

Offline beaky

  • Trade Count: (+7)
  • ******
  • Forum Posts:
    • Melbourne, Vic
Re: SLACK transport company
« Reply #37 on: March 31, 2009, 10:43:28 PM »
i went to power her up but it still had the os plug on it.
so i fitted a new plug on it powered it up and it blew the 4 amp fuse in side the bottom cabinet.
it says it is 220vac so i checked the jumpers on the tranie, they were set for 220v so i checked the bridge rectifiers (no fuse holder in line with these) they were ok. so i replaced the fuse and disconnected the secondary windings (output) of the tfx and powered it up.
i then turned it off and checked the new fuse i put in, it was fine.
so i then connected one of the tfx output plugs (lighting circuits) and powered it up again, no probs the gen illumination lit up.
so i powered down and hooked up the other output plug, powered up and she came to life. :lol !@#.
So I then had a close look at the original blown fuse, and what do you know it was a 4 amp standard 3ag fuse not a slow blow.
some one o.s. must have borrowed the fuse then replaced it with a standard fuse.
 
Logged
On site pinball repairs in MELBOURNE NTH SUBURBS  : Circuit board repairs and refurbishing Australia wide (via Aust post)

Offline Geoffh

  • Trade Count: (0)
  • ****
  • Forum Posts:
    • Melbourne Vic
Re: SLACK transport company
« Reply #38 on: March 31, 2009, 10:46:03 PM »
Mark will be back soon so wait for him he handles the spare parts.

Maybe once he is back resend the original email just in case the first one gets lost in his in box.

I am sure it will be chock full when he opens it.

sorry about the globes it will get sorted out when Mark returns

Logged

Offline beaky

  • Trade Count: (+7)
  • ******
  • Forum Posts:
    • Melbourne, Vic
Re: SLACK transport company
« Reply #39 on: March 31, 2009, 11:52:25 PM »
no problemo

No complaints about this pin though,
defianatly worth the $$$ i paid for it
Logged
On site pinball repairs in MELBOURNE NTH SUBURBS  : Circuit board repairs and refurbishing Australia wide (via Aust post)

Offline markc

  • Trade Count: (0)
  • ******
  • Forum Posts:
    • melbourne
Re: SLACK transport company
« Reply #40 on: April 04, 2009, 09:14:35 PM »
Quote from: Beaky on March 31, 2009, 11:52:25 PM
no problemo

No complaints about this pin though,
defianatly worth the $$$ i paid for it

next time  will charge you more !!

sorry about  transport .....
globes we have    time to kick Tim

others parts you asked about   will email  you   soon


mark
Logged

Offline beaky

  • Trade Count: (+7)
  • ******
  • Forum Posts:
    • Melbourne, Vic
Re: SLACK transport company
« Reply #41 on: April 04, 2009, 09:40:53 PM »
Quote from: markc on April 04, 2009, 09:14:35 PM
Quote from: Beaky on March 31, 2009, 11:52:25 PM
no problemo

No complaints about this pin though,
defianatly worth the $$$ i paid for it

next time  will charge you more !!

sorry about  transport .....
globes we have    time to kick Tim

others parts you asked about   will email  you   soon


mark

re next time will charge you more !!
i will refrase what i said before. as you described the pics its a piece of crap. pf is stuffed, heaps of parts are missing, no clip for back box, bolts for back box to short, parts broken, some one stole the translite and backglass in transport, you should have paid me for rubbish removal  <.> <.> @@* @@* && &&
na just joshing you mark.
it's fine, but the back box bolts were to short.
hope you can take a joke: LOL 
Logged
On site pinball repairs in MELBOURNE NTH SUBURBS  : Circuit board repairs and refurbishing Australia wide (via Aust post)

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Geelong
Re: SLACK transport company
« Reply #42 on: April 04, 2009, 11:23:22 PM »
He can take a joke just dont pick on his coffee
Logged

Offline Geoffh

  • Trade Count: (0)
  • ****
  • Forum Posts:
    • Melbourne Vic
Re: SLACK transport company
« Reply #43 on: April 04, 2009, 11:28:36 PM »
refering to what Mark makes as coffee is quite the joke in itself.

more like swamp water with out the water
Logged

Offline markc

  • Trade Count: (0)
  • ******
  • Forum Posts:
    • melbourne
Re: SLACK transport company
« Reply #44 on: April 05, 2009, 12:37:10 AM »


lol


hey I sent pictures to you ,  some of my best pictures  too 

and what did I call them ??   PIECE OF  CRAP

i said  dont buy it   .  or at least thought it   LOL

and mate I have big  shoulders  and with this lot  I can take  it ....

my coffee  is real good too

buggar re bolts    I told tim not to cut them down  :lol   have to blame someone  *)*

Logged
Pages: 1 2 [3] 4   Go Up
« previous next »