The Aussie Pinball Arcade

Aussie Pinball Forums => Technical Matters => Handy hints and tips => Topic started by: millsy on November 17, 2008, 01:24:15 AM

Title: Budget Playfield Rotisserie
Post by: millsy on November 17, 2008, 01:24:15 AM

Put together this playfield rotisserie - Looks ugly but ok for under $70.
Millsy
www.kevsempinballs.com/rotisserie.htm (http://www.kevsempinballs.com/rotisserie.htm)

Title: Re: Budget Playfield Rotisserie
Post by: pinnies4me on November 17, 2008, 07:55:39 AM

Looks good! What did you use for the black metal pivots?

Title: Re: Budget Playfield Rotisserie
Post by: millsy on November 17, 2008, 10:44:34 AM

Used the tubing off the legs of a old stand I had - as you use 4 saw horses ,the 2 left over you use the 2 pivot brackets and you cut the leg tubing. Wastage - two 90x45 pieces of pine and 3 legs.
millsy.

Title: Re: Budget Playfield Rotisserie
Post by: Strangeways on November 17, 2008, 11:50:09 AM

Great idea Millsy - cheap and does the job. I like the layout of your website as well !

Title: Re: Budget Playfield Rotisserie
Post by: pinnies4me on November 17, 2008, 06:39:25 PM

Quote from: millsy on November 17, 2008, 10:44:34 AM

Used the tubing off the legs of a old stand I had - as you use 4 saw horses ,the 2 left over you use the 2 pivot brackets and you cut the leg tubing. Wastage - two 90x45 pieces of pine and 3 legs.
millsy.

Excellent! Off to Bunnings!