The Aussie Pinball Arcade
Aussie Pinball Forums => Technical Matters => Handy hints and tips => Topic started by: Chad on January 18, 2010, 10:28:08 AM
-
A couple of screw holes in my playfield which hold a solenoid in place are stripped. Do I just put in larger screws or can I fill them up & redrill them, if so what can I use to fill these holes ?
-
Dont use bigger screws. A bit of wood glue and a bamboo skewer( think thats the spelling) will do the trick.
-
Put some Selleys Knead It in the hole and retap the screw just before it goes REALLY hard, take screw aout - allow to fully cure and reseat screw... you now have yourself a purpose built machined hole to screw into
-
Wood Glue and tooth picks. Works every time !
-
yep glue and tooth pick have always worked for me
and then the correct size screw
-
yep glue and tooth pick have always worked for me
and then the correct size screw
tooth pick for smaller holes, skewer for larger.
-
Wood Glue and tooth picks. Works every time !
same here, easy peasy! Just make sure you use a slow drying glue like Aquadere (spelling?) and leave it overnight.
-
Bloody backyarders!!!!!!
-
since I'm a bloody backyarder I will go for the toothpicks & wood glue. Thanks to all for the advice.
-
Wood Glue and tooth picks. Works every time !
Never fails & costs F all
-
wood glue and matches for me.