The Aussie Pinball Arcade
Aussie Pinball Forums => Pinball Mods => Stern => Topic started by: RottyGuy on September 29, 2012, 02:22:37 PM
-
Has anyone here installed mirror blades on their AC/DC Pro ? I was about to, but i'm concerned there's not enough clearance on the
upper left hand side.
-
a operator locally put blades into one of the first ones here in Aus - go to the link to see a quick vid I did at the time.
&feature=plcp
-
Yes i saw that video when it first came out. I can't see how there's enough clearance. I have put the mirror blades on my Avatar without
any problems, but the AC/DC Pro seems a bit risky.
-
They shld fit no issues at all. Will get off my bum and fit mine tonight to my AC/DC Pro and will report back.
-
Did you get around to fitting the blades ??
-
Did you get around to fitting the blades ??
I am doing it today and also fitting out all playfield inserts with LEDS. Will post tonight/this arvo when finished ^^^
-
I finally picked up my blades from eltimbos thought Beauty ill fit them tonight... Got them home only to find the key that usuall hangs from the door is now missing WTF. Looks like its time to drill out my first NIB pinball lock
-
I finally picked up my blades from eltimbos thought Beauty ill fit them tonight... Got them home only to find the key that usuall hangs from the door is now missing WTF. Looks like its time to drill out my first NIB pinball lock
bummer mate, nothing worse when you can't find something important - you end up turning everything upside down in the search
-
I wonder if cavey installed his....
-
YES, they fit fine. ^^^
I can take some photos tomorrow. Just lift n close the playfield slowly, and the playfield does have a little side to side movement when u lift n close etc if u push/pull it gently.
they look amazing. I love them.
Swinksy does it again ! ^^^ ^^^
-
YES, they fit fine. ^^^
I can take some photos tomorrow. Just lift n close the playfield slowly, and the playfield does have a little side to side movement when u lift n close etc if u push/pull it gently.
they look amazing. I love them.
Swinksy does it again ! ^^^ ^^^
Hey Brett a mate bought a AC/DC pro does yours have that weird lock down bar where it clips on? mines the normal type I've never seen that before *.* the bloody switch under the canon button wouldn't line up!!
Peter
-
only Pro model gets the clips which work well instead of the std lever set up.
anyone breaking into a sited model wouldnt know how to open anything else up probably when they cant find the lockdown bar lever.lol %.%
-
Sounds good. I'll fit mine today.
-
Installed the blades today, very easy, but as expected not enough clearance on the left side. Some nice scratches for my trouble. I didn't have
any trouble with the Avatar, but AC/DC, not enough clearance for me....
Great product and well priced. Thanks to swinks.
-
Installed the blades today, very easy, but as expected not enough clearance on the left side. Some nice scratches for my trouble. I didn't have
any trouble with the Avatar, but AC/DC, not enough clearance for me....
Great product and well priced. Thanks to swinks.
which bits hit on the left side ? how big/small are the scratches and are they noticeable ? apparently they are supposed to buff out very easy.
did u secure your blades with > dbl sided tape ?
-
Installed the blades today, very easy, but as expected not enough clearance on the left side. Some nice scratches for my trouble. I didn't have
any trouble with the Avatar, but AC/DC, not enough clearance for me....
that's a bummer, did you leave them in
-
Yeah i left them in. The blades are great.
^&^ for some reason i can't get the playfield to sit down correctly !@# Time to walk away i think.
-
Yeah i left them in. The blades are great.
^&^ for some reason i can't get the playfield to sit down correctly !@# Time to walk away i think.
Dis you fasten with screws if so a playfield component could be riding a screw head of the blades - open the coin door and have look if possible. Hope you solve it, let us know.
-
Mine fitted without a hitch but damn there close with the playfield lifted I thought I could see the playfield touching both sides
-
It's all good swinks. I finally went back to it and got the playfield to sit down. Mirror blades look great. Thanks again.