« previous next »
Pages: [1] 2   Go Down

Author Topic: WILLIAMS SYSTEM 3-6 TEST BENCH SETUP  (Read 422 times)

0 Members and 1 Guest are viewing this topic.

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Geelong
WILLIAMS SYSTEM 3-6 TEST BENCH SETUP
« on: July 17, 2011, 03:07:05 PM »
Hey guys thougt a few of you might be interested in my latest creation.
   Ive wanted to build this for years but always more important stuff to do.  Im having a F**K everyone else weekend and doing some stuff for me and im very glad i did.

  My woodworking skills are crap but im pretty happy with myself after this effort.

It closes up like a suitcase it will have the entire electrical setup for a williams sys 3-6 inside with an LED lamp Matrix
A dedicated LED for each solonoid output all attaced to one Knocker for load
A setup to test each switch
and a button for each special solonoid

   Still need to find the board mounting brackets and install the displays but you get the idea

Logged

Offline pinballheaven

  • Trade Count: (+3)
  • *****
  • Forum Posts:
    • Melbourne
Re: WILLIAMS SYSTEM 3-6 TEST BENCH SETUP
« Reply #1 on: July 17, 2011, 03:13:33 PM »
I saw this yesterday myself and it is such a great idea, trust daniel to think of it!!  ^^^

well done mate I am sure we will put it to good use in the future!!

Jeff
Logged

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
    • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: WILLIAMS SYSTEM 3-6 TEST BENCH SETUP
« Reply #2 on: July 17, 2011, 03:21:26 PM »

Great work Daniel. It will come in very handy. I want to do a similar setup with the Bally / Stern boardset.
Logged
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline Skybeaux

  • Trade Count: (+13)
  • ****
  • Forum Posts:
    • Central Coast / Newcastle
Re: WILLIAMS SYSTEM 3-6 TEST BENCH SETUP
« Reply #3 on: July 17, 2011, 07:02:55 PM »
That's an excellent looking setup you've built.
Will make diagnosing the earlier Williams boards a whole lot easier for you.
Logged

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Geelong
Re: WILLIAMS SYSTEM 3-6 TEST BENCH SETUP
« Reply #4 on: July 17, 2011, 07:14:47 PM »
Quote from: Strangeways on July 17, 2011, 03:21:26 PM

Great work Daniel. It will come in very handy. I want to do a similar setup with the Bally / Stern boardset.

Bally is next Nino think I have everything there I'll need
Logged

Offline Pop Bumper Pete

  • Trade Count: (+4)
  • ******
  • Forum Posts:
    • Ballarat
Re: WILLIAMS SYSTEM 3-6 TEST BENCH SETUP
« Reply #5 on: July 17, 2011, 08:06:09 PM »
aint you clever  ^^^

well done
Logged

Marty Machine

  • Guest
  • Trade Count: (0)
Re: WILLIAMS SYSTEM 3-6 TEST BENCH SETUP
« Reply #6 on: July 18, 2011, 12:11:07 AM »
Looks like a fine portable unit.....until you put the transformer in it....must weigh a bit now huh?  :lol :lol

Cool stuff, and i like the touch of picasso, using only 1 cabinet latch hehehehehe....

MM
Logged

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Geelong
Re: WILLIAMS SYSTEM 3-6 TEST BENCH SETUP
« Reply #7 on: July 18, 2011, 12:24:52 AM »
Yeah sure has some weight in it now onces it's all done I'll weigh it just for a laugh.  I can easily carry itat the moment i don't think the displays and
Stuff won't add that much more weight?
Logged

Marty Machine

  • Guest
  • Trade Count: (0)
Re: WILLIAMS SYSTEM 3-6 TEST BENCH SETUP
« Reply #8 on: July 18, 2011, 01:08:41 AM »
Quote from: ddstoys on July 18, 2011, 12:24:52 AM
Yeah sure has some weight in it now onces it's all done I'll weigh it just for a laugh.  I can easily carry itat the moment i don't think the displays and
Stuff won't add that much more weight?
The scores won't add anything too noticable, but you might consider putting some castor wheels on the rear of the case so you can roll it around when it's vertical, and use an extender handle like the luggage cases.....

2c ;-)
Logged

Offline Pinfan

  • Trade Count: (+2)
  • ******
  • Forum Posts:
    • Melbourne
Re: WILLIAMS SYSTEM 3-6 TEST BENCH SETUP
« Reply #9 on: July 18, 2011, 08:15:35 AM »
Brilliant Daniel, well done.  ^^^
Logged
Some people have big HEADS !

Offline beaky

  • Trade Count: (+7)
  • ******
  • Forum Posts:
    • Melbourne, Vic
Re: WILLIAMS SYSTEM 3-6 TEST BENCH SETUP
« Reply #10 on: July 18, 2011, 06:34:17 PM »
Brilliant job Dan.

so where's my one.  &&

If you need an led and switch matrix made up I am sure I can make you a proper PCB for this.
I am thinking of making up a couple up for my self for a couple of test rigs so if you want one just let me know and I will etch an extra one for you.
Logged
On site pinball repairs in MELBOURNE NTH SUBURBS  : Circuit board repairs and refurbishing Australia wide (via Aust post)

Offline Mr Pinbologist

  • Trade Count: (+5)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Wauchope NSW
Re: WILLIAMS SYSTEM 3-6 TEST BENCH SETUP
« Reply #11 on: July 18, 2011, 09:12:57 PM »
Looks good Daniel  ^^^ i need to build something similar for Wms game boards, same as i did with my own test rig for Bally/Stern/sys1 Gtb displays and driver boards.

Speaking of which.. did you end up using the schematics for mine i sent you ages ago??
Logged

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Geelong
Re: WILLIAMS SYSTEM 3-6 TEST BENCH SETUP
« Reply #12 on: July 18, 2011, 09:53:33 PM »
Quote from: Mr Pinbologist on July 18, 2011, 09:12:57 PM
Looks good Daniel  ^^^ i need to build something similar for Wms game boards, same as i did with my own test rig for Bally/Stern/sys1 Gtb displays and driver boards.

Speaking of which.. did you end up using the schematics for mine i sent you ages ago??

I have it half built on my work bench hidden under all the mess  *!@   But when the time comes to work on my own Ballys ill be sure to finish it.   I cheated and went alltek on the repair i was doing way back then !^! !@)
Logged

Offline TUF-427

  • Trade Count: (+1)
  • *****
  • Forum Posts:
    • Brisbane Queensland Australia
Re: WILLIAMS SYSTEM 3-6 TEST BENCH SETUP
« Reply #13 on: July 18, 2011, 10:49:25 PM »
Nice work mate will come in handy with your machine stockpile!
Logged
Firepower, F14 Tomcat, Terminator2, Twilight Zone, No Fear, TAF, Hyperball, Sttng....

Offline beaky

  • Trade Count: (+7)
  • ******
  • Forum Posts:
    • Melbourne, Vic
Re: WILLIAMS SYSTEM 3-6 TEST BENCH SETUP
« Reply #14 on: July 19, 2011, 01:38:14 AM »
Quote from: ddstoys on July 18, 2011, 09:53:33 PM
Quote from: Mr Pinbologist on July 18, 2011, 09:12:57 PM
Looks good Daniel  ^^^ i need to build something similar for Wms game boards, same as i did with my own test rig for Bally/Stern/sys1 Gtb displays and driver boards.

Speaking of which.. did you end up using the schematics for mine i sent you ages ago??

I have it half built on my work bench hidden under all the mess  *!@   But when the time comes to work on my own Ballys ill be sure to finish it.   I cheated and went alltek on the repair i was doing way back then !^! !@)
Next time you know to go 'Home pin' If you ever need a new bally mpu board again.
Besides I thought alltek built patios. Oh that's right, they're called Altech with 1 'L'  && 
Logged
On site pinball repairs in MELBOURNE NTH SUBURBS  : Circuit board repairs and refurbishing Australia wide (via Aust post)
Pages: [1] 2   Go Up
« previous next »