« previous next »
Pages: [1]   Go Down

Author Topic: Reproducing a Backglass  (Read 285 times)

0 Members and 1 Guest are viewing this topic.

Offline Pinballrocks

  • Trade Count: (0)
  • ****
  • Forum Posts:
    • sydney
Reproducing a Backglass
« on: February 27, 2011, 06:19:06 PM »

 If you have searched high and low and cannot find a backglass for your machine, can they be scanned from
 someone elses and used as a translite?  !@#
Logged
:) :)      PAUL     :):)

Offline mildflame

  • Trade Count: (0)
  • ******
  • Forum Posts:
    • Barossa Valley
    • Mildflame.com
Re: Reproducing a Backglass
« Reply #1 on: March 05, 2011, 05:45:04 PM »
yes, if you can find a scan at around 20+ Megabyte it should turn out ok. as for printing you will need to contact Gavin Teirnan in Qld ( http://www.flipperescue.com/ ) (Retropin) you may not be able to contact him for a while but that will give you time to find a scan, If you have photoshop and want to try editing a backglass you can usually download a ok scan from http://www.vpforums.org/ . I had this problem with a zaccaria but that was easy to get a scan. So good luck and I hope to hear how you go!  %$%
Logged
Check out my website: http://mildflame.blogspot.com.au
Happy reading!

Offline Pinballrocks

  • Trade Count: (0)
  • ****
  • Forum Posts:
    • sydney
Re: Reproducing a Backglass
« Reply #2 on: March 07, 2011, 08:00:06 AM »
 Thanks for your help.  ^^^
Logged
:) :)      PAUL     :):)
Pages: [1]   Go Up
« previous next »