The Aussie Pinball Arcade
Aussie Pinball Forums => Restorations => Topic started by: frosty44 on May 08, 2014, 11:58:18 PM
-
Hi all
Attempting my first playfield swap and finding it a challenge, my question is do you glue the metal ball rails in and
If so what is the best product . The playfield is silverball mania....the rails are the ones around the bumpers about
The thickness of a coat hanger. Hope you can help.
-
No need to glue them, they should just tap unless the playfield is somehow damaged from them being removed. If it's a new CPR playfield your using then you won't have a problem.
-
No need to glue them, they should just tap unless the playfield is somehow damaged from them being removed. If it's a new CPR playfield your using then you won't have a problem.
AGREE ^^^
-
If you need to glue, I use a simple PVA wood glue. Keeps them solid enough and can be removed if required.
Would love to know any other techniques.
-
The pre drilled holes should be slightly smaller in diameter. Tapping them in should suffice. I've never glued them in the past, but it would not hurt.