The Aussie Pinball Arcade
Aussie Pinball Forums => Pinball Trader => Parts wanted => Topic started by: Jango on September 17, 2011, 10:40:57 AM
-
Hi there
I was wondering if anyone has the following parts for a 1980 Bally Space Invaders, or knows where these can be purchased (even in the US). I have tried PSP and no luck there. All research on the net has come up with nothing.
1 x black metal vent grill. This sits in the neck between the cabinet and the back box. One end has a small 90 degree right angle. Bally part number is: P-2754-3 (picture attached)
(http://img87.imageshack.us/img87/9773/noneckventgrillinplace.jpg)
(http://img87.imageshack.us/img87/2103/neckventgrill.jpg)
1 x Bally Apron Plastic Light Cover. This is a small white plastic light cover that snaps into the apron. No part number available (picture attached)
(http://img850.imageshack.us/img850/812/ballyapronplasticlightc.jpg)
1 x 90 degree angled metal bracket with bolt. This attaches to the wooden frame of the backglass and is part of the back box locking mechanism. The hooked cam grabs hold of the attached bolt to secure the backglass to the headbox when in the locked position. I do not have a part number (picture attached)
(http://img199.imageshack.us/img199/9374/90degreebracket2.jpg)
(http://img17.imageshack.us/img17/6558/90degreebracket.jpg)
Regards
-
My brother said he has that steel with the holes in it at his work if u have no luck let me know and I'll see if he can bend you one up
-
Your best bet is to have someone make it for you.
-
Email me through the dimensions of the parts and I'll see about getting them made.