Aussie Pinball Forums > Pinball Repairs / Problems & Assistance
Pin 2000 issue
rustalan:
Hi AllMy Revenge From Mars has spat the dummy. It started off with a stuck gun but was able to clear that with a gentle tap or to on the the tube neck and ran fine. A day or so after that I booted and had nothing so turned off the pc via it's button then restarted and all was well.
A few days later I turned it on to no boot up at all, this time the pc restart had no effect as far as I can tell with no drive or post start beeps.The PC power light is on as is the double card light and the motherboard fan is running. I can't see any fat or split caps.
The Tube hums and does flicker when the pc is rebooted.
Any Clues??? !@#
rustalan:
As no one seems to have any idea's I guess I might have to part it out. !!!
ddstoys:
Maybe try reseating the prism cars and ram chips
Sent from my iPhone using Tapatalk
rustalan:
That was the first thing I did in fact, but alas no joy.
ddstoys:
Only other thing I can suggest is maybe try another power supply
Sent from my iPhone using Tapatalk
Navigation
[0] Message Index
[#] Next page
Go to full version