The Aussie Pinball Arcade
Aussie Pinball Forums => Member Services => Sales and Services => Swinks - Pingineering => Topic started by: swinks on September 12, 2013, 02:10:27 PM
-
I did borrow the idea from elsewhere to help others but the art work is all mine, using the same Sublime Medium Font and size based off an estimate from photos but very close
The two files are a screen shot for a visual representation and the other is a illustrator file to take to the screen printers to get your screen made.
Screen size is 9 inches wide x 12 inches down
The font area is 5 inches wide by 3 inches down
-
I based the design off the following photos as have no pins to measure from
-
I took some photos of my pin with a some measurements of the text. I'm no good with imperial measurements but I measured 47mm high x 92mm wide. I hope this helps.
-
Thanks for the photos and info ^^^, have corrected now so the text is centre on the screen and the text is approx 97mm x 47mm within a millimetre
see files with this post and ignore the original post attachments
-
I appreciate your effort! ^^^ I wasn't sure what I was going to do with the text when I repainted. I feel pretty confident with it now!
Cheers Dan
-
sorry the design was done to 92 x 47mm so ignore my typo in my previous post stating 97mm.....