The Aussie Pinball Arcade

Aussie Pinball Forums => Pinball Trader => Parts wanted => Topic started by: Klondike on November 12, 2013, 02:42:48 PM

Title: Gottlieb System 1 Backbox locking brackets wanted.
Post by: Klondike on November 12, 2013, 02:42:48 PM

Hi,
I have a Gottlieb System 1 and it's missing one of the metal pieces that the locking mechanism goes into when you turn the key. There are two of them on the section that supports the backglass...one of mine is bent and won't lock and the other is missing so if you have one or two to sell that would really help me out. At the moment I have a rolled up cloth wedged underneath so it stops opening while I'm playing!

Title: Re: Gottlieb System 1 Backbox locking brackets wanted.
Post by: Klondike on November 14, 2013, 02:26:12 AM

Apparently they're part number  # A21033 and the part's called a 'lock strike'.
Mark C. doesn't have any, PBR don't stock 'em and RTBB have 'gone fishin' so any help would be appreciated.

Title: Re: Gottlieb System 1 Backbox locking brackets wanted.
Post by: ddstoys on November 14, 2013, 07:42:06 AM

Can you send me a reminder pm about 5.30tonight and ill take a look for you

Title: Re: Gottlieb System 1 Backbox locking brackets wanted.
Post by: Klondike on November 14, 2013, 07:36:00 PM

PM sent.

Title: Re: Gottlieb System 1 Backbox locking brackets wanted.
Post by: ddstoys on November 14, 2013, 07:44:38 PM

This one?
(http://img.tapatalk.com/d/13/11/14/tu9a4amu.jpg)

Title: Re: Gottlieb System 1 Backbox locking brackets wanted.
Post by: Klondike on November 21, 2013, 12:04:30 AM

Thanks very much Daniel.