The Aussie Pinball Arcade
Aussie Pinball Forums => Pinball Mods => Bally / Williams => Topic started by: Dann36 on May 20, 2012, 10:48:59 PM
-
There seems to be a lot of interest in mods that i have seen in my short time here for the holo lately.
Thought id share what im working on for my creature holo replacement, see link attached
http://youtu.be/R4zA-zb2rKQ
-
That is very cool, can you share any more info? And is it something that others can do easily?
-
Very Impressive. @@*
Is it a small LCD?
Looks like an excellent solution to a common problem.
-
Oh yes... much better than the holo.. well done!
-
Wow...vn work. *%*
-
That is very cool, can you share any more info? And is it something that others can do easily?
+1
Dan, that looks excellent . I am very keen to see/hear more about this *%*
Would love to add it to my machine
-
You’ve done well
-
Looks awesome!! @@*
-
Impressive - now how did you do it :D
-
now that is cool.
-
$$( Some info regarding your creature mod would be awesome $#$
-
thanks guys...
It is an LCD, it mounts in place of the creature hardware and plugs into the loom. It operates just as the creature normally would, quick flashes when you spell film and then constant when you have found the creature. The image is stored in flash ram on the controller board. there is also an SD card slot in case another image needs to be shown without replacing the built in one.
-
Awesome Daniel, put me on the list to buy one ^^^
-
Awesome Daniel, put me on the list to buy one ^^^
Me too please Daniel ()
-
That's awesome! ^^^
-
That is awesome ! Great work.
-
I'd like one for mine too. Please let us all know if you can make a small run for us?
-
I'd like one for mine too. Please let us all know if you can make a small run for us?
I sure hope the old 'Licensing Issues" BS doesn't interfere with this
-
WOW nice work ^^^
-
I installed this mod in my game yesterday .
Its easy to instal and plugs into the existing loom.
What an improvement #*# #*# ()
Here is a short vid and a couple of pics showing the installed screen .
http://s277.photobucket.com/albums/kk47/4201dave/?action=view¤t=105_0601.mp4
Daniel tells me these will be for sale very soon .
I highly recommend this excellent mod for any owner of a CFTBL. ^^^
-
I installed this mod in my game yesterday .
Its easy to instal and plugs into the existing loom.
What an improvement #*# #*# ()
Here is a short vid and a couple of pics showing the installed screen .
http://s277.photobucket.com/albums/kk47/4201dave/?action=view¤t=105_0601.mp4
Daniel tells me these will be for sale very soon .
I highly recommend this excellent mod for any owner of a CFTBL. ^^^
Thats awesome,cant wait till dann has some for sale $#$
-
First class mod!! Up there with ColorDMD as the must have mod!!
-
First class mod!! Up there with ColorDMD as the must have mod!!
I will buy another creech if this comes up for sale!
-
Definitely count me in!
Please let us know when they are available to purchase.
-
Definitely count me in!
Please let us know when they are available to purchase.
+1
Me too!
-
Hi
I’ve received a lot of messages about how this works so I thought id let everyone know at the same time.
It replaces the original hologram hardware, so you remove the existing hologram hardware and store in a safe place then the LCD hardware can be installed using the existing mounting holes. It plugs into the loom, not needing any modifications.
The creature appears instantly when called for by the machine, there is no delay.
The creature will be triggered exactly as its intended. It will flash briefly when a letter is achieved and will be on when you find him for mulltiball, also displayed in the attract mode when told to.
It comes with a rendered movie of the creature on internal memory, but this can be disabled by a switch so any movie file of your choice can take its place using the SD card slot, so you can change at will what you see in the swamp if you like.
Thanks
Daniel
-
Hi
I’ve received a lot of messages about how this works so I thought id let everyone know at the same time.
It replaces the original hologram hardware, so you remove the existing hologram hardware and store in a safe place then the LCD hardware can be installed using the existing mounting holes. It plugs into the loom, not needing any modifications.
The creature appears instantly when called for by the machine, there is no delay.
The creature will be triggered exactly as its intended. It will flash briefly when a letter is achieved and will be on when you find him for mulltiball, also displayed in the attract mode when told to.
It comes with a rendered movie of the creature on internal memory, but this can be disabled by a switch so any movie file of your choice can take its place using the SD card slot, so you can change at will what you see in the swamp if you like.
Thanks
Thanks for info dann, i think i speak on behalf of thousands creature owners, WHEN IS YOUR MOD FOR SALE,or is there issues with licensing bs &^&
Daniel
-
Was waiting on feedback from test units that were sent out before i said so but all ok now.
Units are being made rite now and will be for sale as soon as the first run is complete which should be the second week of next month..
-
Great news Dann . ^^^ Mine is still working fine by the way .
-
Dann, could you please add me to the list of VERY keen CFTBL owners who would like purchase your mod.
Cheers
Graeme
-
Dann, could you please add me to the list of VERY keen CFTBL owners who would like purchase your mod.
Cheers
Graeme
+1
Very impressed and looking forward to owning one.
D.
-
Hi Dan
Noticed on Pinside the other guy coming out with a very similar item to yours is contemplating a screen saver mode that plays in between the FILM letter and the action multiball mode - would awesome to show ripping water moon lit with a odd creature shadow in the depths.
Do you reckon you could introduce that in yours - would be even better than a black void.
-
Gday mate
Sure, that could be done with an update.
I think showing something like that every so often would be better than all the time though, It is meant to be a reward seeing the creature. Showing an image all the time would detract from the game.
-
Gday mate
Sure, that could be done with an update.
I think showing something like that every so often would be better than all the time though, It is meant to be a reward seeing the creature. Showing an image all the time would detract from the game.
I agree , all the time would be no good . Please let me know if you do develop an update Dan ^^^
Cheers
Dave
-
Update is actually already in progress, but will let you know when its ready..
For now just getting the first run ready to send out..
-
Looks Great...I'm interested in getting this mod.
Gordo.
-
Hi Guys
An update to the creature LCD as i have had quite a few questions and there are a few additions that people have requested that i want to advise on.
Version 1 is sold out and version 2 of the LCD will be released soon (just waiting on some of the extra video animations to be completed). Also those with version 1 will be contacted to bring it up to version 2 at no cost.
Customers had requested the following so version 2 will now have:
Attract mode -- After the machine has been in attract for more than one minute the attract mode will start and display, as soon as a game is started the attract will stop.
Swamp scene -- During play there will be an animated swamp scene playing, this will vanish when the creature is meant to be displayed.
Original Mode -- This will disable the extra features and just display the creature, as the machine originally did, via a switch.
And of course the creature will be displayed in multiball and briefly when the FILM letters are achieved.
There is also provision for people to change the videos to whatever they want to put on if they want something different via an SD card
Below is a link to an install/review video that the Pinball Ninja has done, this is version 1 but the procedure is exactly the same as version 2, it just does not show the extra features. This is a private video of the Pinball ninja so please do not repost the link elsewhere.
http://youtu.be/MeobBSlimdc
Please PM me if you want to be added to the order list.
Thanks and please let me know if there are any questions.
-
Great work Dan. Looking forward to upgrading my unit.
-
Great work Dan. Looking forward to upgrading my unit.
+1 . My unit is still working fine and loving it
-
very cool Dan, and since I sold a pin and a cnc I can afford to keep the creature (as I almost had to sell it) and get this mod #*#, look forward to a video of the Version 2
Great Work
pretty cool that pinball ninja did a video.
-
Just sent a PM - nice work btw.
-
Hi Guys'
A quick view of two of the new modes, There just about complete with only some minor things to be added. The Attract mode will be done soon and i will put up a complete video and game play when there all complete.
The links below show the animated swamp scene shown during play, the creature when you achieve a FILM letter and when you are in mutiball.
The recordings didnt come out the best the video came out washed out, when i do the final recording i'll have to do a better one..
These are my videos unlike the one above so i dont mind if the links are posted else where.
Any questions or specifics please ask or PM
Thanks
Daniel
-
Awesome - Has to be one of the best mods for any game.
-
Hi Dan
looks great, love the use of the water and the moonlight ^^^
cheers
Jady
-
Looks great Dan . ^^^
-
Thanks guys' the water and moon is still being tweaked a little but nearly there.
-
Forgot to mention..
In addition to the above modes, there will now be audio in the Attract mode that will play through the machines sound system. Adjustable so it can be turned off..
-
Forgot to mention..
In addition to the above modes, there will now be audio in the Attract mode that will play through the machines sound system. Adjustable so it can be turned off..
Sweet Daniel . Looking forward to the updated version . I reckon the water and moon really adds to what is already a great Mod ^^^
-
Hi everyone
A quick view of the Attract Mode, still some things to tweak but this shows what it will be like..
The audio is from the machines sound system and can be adjusted at any time via the buttons inside the coin door or via the dedicated volume control..
Mixed in is also a 3D glasses trailer that will show up in the attract mode for a fun little hidden bonus..
http://youtu.be/fiOHi3_BoDM
Thanks
Daniel
-
very cool, let me know when I can you can send me one. ^^^
-
very cool, let me know when I can you can send me one. ^^^
Outstanding, put me down for one too please.
#*#
-
Great stuff Dan! I'd love to be able to upgrade the LCD I bought from you last year, to run this clip/software, will it be possible?
-
Very cool, I might treat my creature to this mod.
-
Great stuff Dan! I'd love to be able to upgrade the LCD I bought from you last year, to run this clip/software, will it be possible?
Yes mate, all of those with version 1 will have their unit upgraded to this when done.
-
Dan what is your build and ship timeline? I have got money burning a hole in my pocket for this mod. Best I have seen.
-
I was hoping to already have them done unfortunately adding a few things has taken more time than what i thought. i am aiming for this month as long as everything goes well..
-
Wow,that's even more impressive than the American effort,sign me up
-
Sign me up too, excellent work.
-
Any idea of price?
-
Any idea of price?
Price is the same as version 1, $350 plus postage. This includes everything that is needed to install and run..
-
Looking for some feedback please..
There will be numerous trailers shown in the attract mode ( horror films from the era) along with the creature ones.
As it is now, audio will be played for all of them while in attract..
The other option would be to have only audio for the creature ones and mute the other trailers.
What would you prefer ? Audio for them all or just the creature ones ?
-
tough one to answer, thinking just have sound for the creature one but the others could be interesting, is it possible to give us a teaser to help decide.
and is the attract mode just played once and then the game needs to be played again to then wait for the 2 minutes to launch the attract mode again - if that is the case maybe keep the sound on all of the trailers. definitely will be fun.
-
Gday Dan .
I see the theme for Creature as 50's drive-in .
Just watched your clip again and your attract mode update is 50's drive-in so I think sound on for all clips would work well .
Can't wait to have this update running in my game #*#
Fantastic work Dan ^^^ ^^^
-
The attract mode runs whenever the machine is in attract, its constantly there..
The final one will be around 10 minutes long and repeat itself as it ends. So what i was thinking was to have audio for everything and then every second time it repeats the audio will be only on the creature related clips.
-
I like your idea with the sound on for the first rotation, then off. Is there anyway to allow the user to modify the sound settings themselves? On all the time, on once or off completely when in attract mode?
-
I like the idea of the attract mode but it would be nice that attract mode could be at half volume or no volume once everything plays through once, or after 10 minutes of no game play that a clip plays with volume. I think if all the clips were at full volume especially the clip that goes for 10 minutes with volume I would probably turn the machine off based on trying to here other games and where the games sit.
sorry just my feedback
-
I like your idea with the sound on for the first rotation, then off. Is there anyway to allow the user to modify the sound settings themselves? On all the time, on once or off completely when in attract mode?
unfortunately that would not be possible once the rom is programmed, sorry.
-
I like the idea of the attract mode but it would be nice that attract mode could be at half volume or no volume once everything plays through once, or after 10 minutes of no game play that a clip plays with volume. I think if all the clips were at full volume especially the clip that goes for 10 minutes with volume I would probably turn the machine off based on trying to here other games and where the games sit.
sorry just my feedback
thats cool thats what i asked for..
The entire attract is just on ten minutes, there is no single clip that goes for ten minutes though.
I cant do half volume, but the level can be set with a volume pot independently of the machines volume level.
-
I like the idea of the attract mode but it would be nice that attract mode could be at half volume or no volume once everything plays through once, or after 10 minutes of no game play that a clip plays with volume. I think if all the clips were at full volume especially the clip that goes for 10 minutes with volume I would probably turn the machine off based on trying to here other games and where the games sit.
sorry just my feedback
thats cool thats what i asked for..
The entire attract is just on ten minutes, there is no single clip that goes for ten minutes though.
I cant do half volume, but the level can be set with a volume pot independently of the machines volume level.
I misunderstood you on the ten minutes, I took it as the last clip was 10 minutes but the pot is good for me as is the total of 10 minute clips.
Sold me ^^^
-
A short vid of the final attract mode cut down to a few minutes from start to finish, the actual is just on ten minutes..
http://youtu.be/172Lffk_zwk
Thanks
Daniel
-
That looks great! Well done. ^^^
-
looks good, I take this video is the no sound option
-
Nice one Daniel . Looks great ^^^
-
Excellent - Very well done. The start of the video reminds me of the old projectors. Fits in exactly with the theme and mood of the game. @@*
-
looks good, I take this video is the no sound option
Gday
No, when i converted the file on the pc the sound was dropped for some reason
-
Hey Dann. How long do you think it will be before you have these ready for sale?
-
Hey Dann. How long do you think it will be before you have these ready for sale?
Gday
wont be very long now, will most likely start sending out in a week or so the first ones, and then go down through the list of people a little time after that..
-
Gday Dann. How about those of us upgrading from version 1 .. I forget if there is a USB port ?? Not home at the moment to look. How will we upgrade ?
Cheers
Dave
-
Those that have version 1 will be contacted when the upgrade is ready to send out.. i have a list of all those with version 1 so i will conatct each in turn and advise..
Thanks
Daniel
-
^^^
-
A short vid of the final attract mode cut down to a few minutes from start to finish, the actual is just on ten minutes..
http://youtu.be/172Lffk_zwk
Thanks
Daniel
That looks fantastic ^^^
-
A short vid of the final attract mode cut down to a few minutes from start to finish, the actual is just on ten minutes..
http://youtu.be/172Lffk_zwk
Thanks
Daniel
That looks fantastic ^^^
Yes that looks awesome! Great work. ^^^
-
Good to see some innovation in a 20 year old machine. ^^^
-
Hi Dan let me know when you have my LCD ready can't wait to put this mod in the game. It will be a great improvement
Thanks mate
Adrian
-
Any news on the upgrade Dan?
-
Any news on the upgrade Dan?
Yes i have slowly been sending out units. Those with the first one i will contact as their name comes up for the update.. Also going down the order list for everyone else. Each one is tested in game so it takes a bit to get done..
-
AWSOME Dann
I still havnt fitted my version 1 wasn't sure if the mounting hardware is different?
If I mount this one will I only need to send you the screen?
-
AWSOME Dann
I still havnt fitted my version 1 wasn't sure if the mounting hardware is different?
If I mount this one will I only need to send you the screen?
Mounting is the same mate..
i am contacting those with version 1 with specifics..
-
I installed version 2 yesterday arvo . Installation is easy and the manual is easy to follow .
I have to say that I think this version is Fantastic ^^^ ^^^.
I thought Version 1 was great (and it was) but this is a huge improvement again .
I like the details in the images such as the clouds scudding across the moon and the water pouring off the Creature as it appears .
In fact the Creature looks better than ever .
The video clips in attrack mode add a whole new dimension to the machine too .
No longer is it just sitting there flashing lights after the last song plays (well, if you have the dialog turned off like I do anyway)
I have taken off the light shroud as I found it interferes with the view of the screen , particularly the clips and my game is fine without it .
I highly recommend this mod to anyone thinking about getting it .
Cheers
Dave
-
Bump me up on your list will ya && - have been waiting for this mod for a while. Looks fanatastic.
-
any chance of a few photos of the assembled unit and a video of the latest features, got some money to spend but would like to see something if possible
-
any chance of a few photos of the assembled unit and a video of the latest features, got some money to spend but would like to see something if possible
I dont have access to a machine all the time so it will take a bit to get another video, will post it up as soon as i get the chance to film one..
-
Hi Dann,
Got any ball park figures on pricing yet?
-
I'm picking mine up tonight jady ill install it over the weekend and post a video and some photos
-
I'm picking mine up tonight jady ill install it over the weekend and post a video and some photos
Love to see mate, can't wait!
-
I'm picking mine up tonight jady ill install it over the weekend and post a video and some photos
Cool daniel, looking forward to some pics and video of this mod.
-
I'm picking mine up tonight jady ill install it over the weekend and post a video and some photos
Thanks Daniel ^^^, Dan has allocated one for me as keen but at the moment it's quite a few dollars without seeing some info - looking forward to seeing a feature video and some install photos
-
Well I picked up my version 2 creature mod from Dan this afternoon. These come bet neatly packed with a very simple easy to read set of instruction.
Step 1. Purchase the unit
(http://img.tapatalk.com/d/13/06/07/zyhudete.jpg)
Step 2. Open it up and check everything is there
(http://img.tapatalk.com/d/13/06/07/usaruvub.jpg)(http://img.tapatalk.com/d/13/06/07/sy8a5a4e.jpg)(http://img.tapatalk.com/d/13/06/07/hutu8e2a.jpg)
Step 3. Lift your Playfield and remove the original hologram bracket (5screws) and the light shield (6screws) and put them aside.
(http://img.tapatalk.com/d/13/06/07/u9u2yqur.jpg)(http://img.tapatalk.com/d/13/06/07/ra8etyze.jpg)
Step 4. Mount the bracket to the back of the LCD screen with two washer for each screw to hold the bracket off the screen
Step 5. Screw new light shield onto Playfield using original holes only difference is the end tabs are folded in not out to open up the shield.
Step 6. Screw the LCD screen to the Playfield also using original screws and holes
Step 7. Run the wires as shown in the manual so simple anyone could do it. Whole install took me 15min
(http://img.tapatalk.com/d/13/06/07/yzyge5u9.jpg)
The new setup doesn't look to much different to the original and looks great way better with the lagoon instead of an empty Playfield window most of the game. Ill upload some videos soon very hard to video with the LEDs blairing away.
(http://img.tapatalk.com/d/13/06/07/ara4y6yh.jpg)(http://img.tapatalk.com/d/13/06/07/8epuja7a.jpg)(http://img.tapatalk.com/d/13/06/07/pu5aze3e.jpg)
-
Here is a quick one. Took a longer video of the attract mode video but not all of it it goes for ages its AWSOME with heaps of what seem to be ok movie teasers etc and an actual 3d section with glasses and everything
-
Looks like a really good effect Daniel - love to see the longer video when you get a chance.
-
Thanks Daniel
What is the feature footage when you get a letter of film?
what is the feature footage when you get find the creature in multiball and then when you find the girl?
The moon on the water is a great effect ^^^ well done Dan, PM sent
-
Thanks Daniel for taking the time to post some pics and vid . I was going to do it this weekend but you have beaten me to it ^^^
Cheers
Dave
-
Here is a video of the attract mode feature.
I didn't actually play a game so no idea what it does when you get the paid feature
-
Don't know what I'm doing wrong and I'm out of patience here is the link
-
The link was I think for a youtube *mobile* site, the URL had "youtuDOTbe" in it. PC recognized it, but the forum software didn't (the software predates the mobile site boom). I added the PC style link to your post Daniel to fix.
Looks good!!
-
Hopefully this one works this is what happens when you get kiss, snack bar , paid etc
And the link incase it doesn't work again lol
-
That's such an awesome mod cheers for posting the video.
Peter
-
much appreciated Daniel, sorry to wear down your patience - very cool mod features
-
much appreciated Daniel, sorry to wear down your patience - very cool mod features
Don't worry it wasn't you guys wearing down my patience its my bloody jukebox. Almost got it selects the right numbers now just the wrong letters grrrr
-
This is a mad mod. Makes me want to go out and get a creature just to do the mod @@* Absolutely fabulous mod well done Daniel.
-
The cfbl lcd mod looks awesome,
Thanks daniel for posting pics/vids and info,
Guys in the west are so looking forward to dann finishing our units $#$
-
Great mod. I have always avoided Creatures but no reason for anyone not to get one now
-
Hi Dann,
Got any ball park figures on pricing yet?
Price is $350 Aus plus postage..
Thanks
Daniel
-
Sounds like a bargain Dann! Looks like you've done a great job. When can I get one?.....Seriously, how do I order 1?
-
That's unreal! Congratulations on a great job, PM sent..
-
Hi
A lot of people had been asking about the original mode, this is a quick video showing the new creature original mode video. A NOS hologram was filmed for this mode.
&feature=youtu.be
Thanks
Daniel
-
very nice Dan, looks great ^^^
-
How are these going, still in production?
-
I have a customer that wants one, can i buy one yet?
-
Are they still available?
-
Hi Dan, I too would be interested in one of these, they look awesome. Any updates for purchasing?
-
I have installed 3 of these in customers CFTBL.
No dramas to report.
all 3 customers happy.
the customers had acquired their own mod
I have turned away dozens of people who want these holograms installed because I just can't get them ^&^ ^&^ ^&^
I have 1 customer contacting me on a monthly basis asking me if they are available ^&^
Please give us a mailing list or something so we know when you are taking orders or they are available ^&^ ^&^ ^&^.
this is the plea i have received from several want to buy CFTBL owners
-
Hi guys'
I have not had the time to come on here a lot lately to update the thread but yes they are still available. Unfortunately the current and also the next 2 batches are all spoken for.
The demand has surprised me a bit actually, i thought i would be able to make enough to keep up but apparently not as work seems to sap all my time away.
As soon as i finish all the current orders i will start taking new ones but only when i finish all the current ones..
I do apologize for not keeping the thread up and will post when im taking orders for the next batch which should be late July early August.
Thanks
Daniel
-
Well worth the wait, unreal product.
-
Hi guys'
I have not had the time to come on here a lot lately to update the thread but yes they are still available. Unfortunately the current and also the next 2 batches are all spoken for.
The demand has surprised me a bit actually, i thought i would be able to make enough to keep up but apparently not as work seems to sap all my time away.
As soon as i finish all the current orders i will start taking new ones but only when i finish all the current ones..
I do apologize for not keeping the thread up and will post when im taking orders for the next batch which should be late July early August.
Thanks
Daniel
Fantastic work; I would like one when new orders are available
-
Hi Dann like everyone else *%* could you please put us on the list for a new holo .. cheers nick ...
-
I would like to order one too, just to give you an idea that there is still some of us out here that would like to order your product.
-
keep the updates coming Dan ^^^
-
Hey Dan, just wondering how the LCD mods are coming along? Any chance of bundling a creech and TZ mod together??
-
Hey Dan, just wondering how the LCD mods are coming along? Any chance of bundling a creech and TZ mod together??
Only hold up at the moment is some parts that seem to have been lost in the post, the sooner aus post find them the better. As soon as they arrive i can finish off the ones waiting. This is the reason i got around to making the TZ tv's again so if i make more TZ tv's in the mean time then sure.
-
I have just bought a CFTBL with this lcd mod installed and have a few questions. Is this mod still being made? Does anyone have Dans email address or number I could get in touch with him regarding my questions? Thanks! :)
-
I have just bought a CFTBL with this lcd mod installed and have a few questions. Is this mod still being made? Does anyone have Dans email address or number I could get in touch with him regarding my questions? Thanks! :)
I have only had contact with Dan via PM so can't help you with an email address or phone number . He is (or was) pretty responsive to PM's .
I did have a problem with my mod (I had one one of the early version 1's , now have Version 2) and he was very good at helping me with my issue.
-
I have just bought a CFTBL with this lcd mod installed and have a few questions. Is this mod still being made? Does anyone have Dans email address or number I could get in touch with him regarding my questions? Thanks! :)
PM via Dann36
-
Thanks fellas. Have pm'ed him.
-
Sorry for late reply, don't have a lot of time lately to come on here.
Sent you a few things to check in your machine mate, let me know if your able or send it to me and I'll fix if needed.
-
Amazing service Dan. Really appreciate your help.
-
I have a customer who wants one of these, please send me details on how to pay for 1 so i can get the ball rolling
-
Life has gotten in the way lately and i just have had no time to do anything but i am finishing up the last run of these soon. i will post here when they are all done so rite now i wont be taking orders until all have been finished, boxed and ready to post.
Ive contacted everyone who has been on my lists and sent them their order with the last two runs i have done, however im sure there are a few who i have missed. With this last run anyone who i missed will have first choice.
Im using all the parts i have up, so this run will most likely be the final one with the exception of a few custom ones that i have done for some of you ( the best one being matching animation for a guy who had the naked play field art ) that might continue if i have time.
Im sorry for any delays but it cant be helped..
Thanks
-
PM sent, would love one please!
-
Yes me too. PM sent.
-
PM sent Dan would love the mod to finish the last piece of the puzzle to my creature restoration *%*
-
PM Sent - hope I'm not too late !
-
Can highly recommend Dan. He's very willing to help and stand by his products.
-
Put me down if I'm not too late :)
-
i would like one also
-
I would like one if possible.
Gordo...