The Aussie Pinball Arcade
Aussie Pinball Forums => General Discussion => General Pinball Discussion => Topic started by: noddy217 on May 05, 2012, 03:22:04 PM
-
Hi out there does anyone have photo's of the wireing setup for the tilt / game over relay in the Genie pin as we disconnect it to fix a problem with the playfield lights & didnt take photo on they are connected !!!!! any links would be a help too!!! ^&^ ^&^ as all the ones were looked at on not clear enough cheerz Noddy !@# ^&^
-
Cant help with the picture but next time just slide some paper between the contacts to prevent operation rather than completely disconnecting
-
Not sure whether this can help!
-
thanks for that photo did the job next time i'll take photo's !!!! #*# #*#
-
Good news! Here's the link where I found the image for any other reference in the future. http://www.pinrepair.com/sys1/index.htm (http://www.pinrepair.com/sys1/index.htm)