The Aussie Pinball Arcade
Aussie Pinball Forums => Pinball Mods => General Mods => Topic started by: swinks on February 14, 2014, 07:38:01 PM
-
Nelly discovered this stuff and started to produce so cool effects for his Buffy game - this stuff is awesome.
Nelly did a timber grain effect, but you can get so many effects from this one supplier and there are probably others as well.
here is a video of application
&feature=player_embedded
and a video of durability
&feature=player_embedded
a cool motorbike tank with flames
utoplay=1&rel=0
so imagine the customisation with this stuff - camo flipper bats for buck hunter or flame flippers for AC/DC or carbon fibre ones for car themed pins as well as other things - very cool.
This is one place you can get the gear from
http://www.mydipkit.com
-
Holy shit, with that and a 3D printer, the world would be your oyster! I know the 3D-printed stuff wouldn't be good for hard-wearing things like flippers, but for certain plastics or DIY mods, it'd be insane.
-
The Hydrographics are cool but the range is very limited. Due to the high initial cost of printing set up, a very limited graphic selection is available.
Patterns are bought in sheets.. some 30 patterns to choose from, most of which are repeated.. timber grain ( 3 off ) camouflage ( 3 off) etc.
-
There is a few cheap kits about on Aussie website for 100 dollars with a lot of metal patterns. Seen a battery drill done in a American flag. Looked awesome.
If thats what u into.