The Aussie Pinball Arcade

Aussie Pinball Forums => General Discussion => General Pinball Discussion => Topic started by: riverinapinball on March 09, 2017, 03:55:01 PM

Title: Gottlieb Joker Poker parts needed
Post by: riverinapinball on March 09, 2017, 03:55:01 PM

I am after lane guides A-9395 white x 2 (2 and 1/8 inch) and A-9397 Red x 1 (2 and 1/2 inch)
Does anyone have these in Australia?




Sent from my iPhone using Tapatalk

Title: Re: Gottlieb Joker Poker parts needed
Post by: ddstoys on March 10, 2017, 02:21:17 AM

I have lots of lane guides I'll try remember to look tomorrow


Sent from my iPhone using Tapatalk

Title: Re: Gottlieb Joker Poker parts needed
Post by: pinnies4me on March 12, 2017, 11:40:36 AM

I couldn't even find a A-9397 at Pinball Resource, closet they have is the same thing but double sided. Dan, if you find two, can I score the second one from you?

Title: Re: Gottlieb Joker Poker parts needed
Post by: ddstoys on March 12, 2017, 07:51:11 PM

Sorry forgot all about these I'll try remember tomorrow


Sent from my iPhone using Tapatalk

Title: Re: Gottlieb Joker Poker parts needed
Post by: ddstoys on March 15, 2017, 08:54:12 PM

(https://uploads.tapatalk-cdn.com/20170315/a991c135344b6a9f82391184758f9640.jpg)

Ok are your measurements from end to end or hole centre to hole centre?


Sent from my iPhone using Tapatalk

Title: Re: Gottlieb Joker Poker parts needed
Post by: riverinapinball on March 16, 2017, 08:17:34 AM

Quote from: ddstoys on March 15, 2017, 08:54:12 PM

(https://uploads.tapatalk-cdn.com/20170315/a991c135344b6a9f82391184758f9640.jpg)

Ok are your measurements from end to end or hole centre to hole centre?


Sent from my iPhone using Tapatalk

I will check this afternoon. I was going off the part manual.


Sent from my iPhone using Tapatalk

Title: Re: Gottlieb Joker Poker parts needed
Post by: riverinapinball on March 16, 2017, 03:54:32 PM

Quote from: ddstoys on March 15, 2017, 08:54:12 PM

(https://uploads.tapatalk-cdn.com/20170315/a991c135344b6a9f82391184758f9640.jpg)

Ok are your measurements from end to end or hole centre to hole centre?


Sent from my iPhone using Tapatalk

I have double checked and it's  from centre of hole to centre of hole.

Cheers mate


Sent from my iPhone using Tapatalk

Title: Re: Gottlieb Joker Poker parts needed
Post by: riverinapinball on March 17, 2017, 08:32:25 AM

Also these are the one sided type


Sent from my iPhone using Tapatalk

Title: Re: Gottlieb Joker Poker parts needed
Post by: ddstoys on March 17, 2017, 11:29:13 AM

I found some a-9397 but there more orange than red


Sent from my iPhone using Tapatalk

Title: Re: Gottlieb Joker Poker parts needed
Post by: ddstoys on March 17, 2017, 11:31:27 AM

(https://uploads.tapatalk-cdn.com/20170316/203cb2be3c7dde33b176d73c1e952d66.jpg)


Sent from my iPhone using Tapatalk

Title: Re: Gottlieb Joker Poker parts needed
Post by: ddstoys on March 17, 2017, 11:37:59 AM

Found some 9395 and some 9396s which are the same size just double sided trim off a side and your good to go


Sent from my iPhone using Tapatalk

Title: Re: Gottlieb Joker Poker parts needed
Post by: ddstoys on March 17, 2017, 11:38:43 AM

(https://uploads.tapatalk-cdn.com/20170316/7baa69fac9b0b9c96f74258d33f5e9cb.jpg)


Sent from my iPhone using Tapatalk

Title: Re: Gottlieb Joker Poker parts needed
Post by: ddstoys on March 17, 2017, 11:50:29 AM

Pair of side cutters, sand paper and some novus 3 and we have a single sided red


Sent from my iPhone using Tapatalk

Title: Re: Gottlieb Joker Poker parts needed
Post by: Strangeways on March 17, 2017, 09:43:41 PM

Found some stashed away - don't worry about the photo, they are red ;

http://www.rtbb.com.au/catalog/product_info.php?products_id=2999 (http://www.rtbb.com.au/catalog/product_info.php?products_id=2999)

If you need second hand, I think I will have some as well - I'll check back on Monday for you.

Title: Re: Gottlieb Joker Poker parts needed
Post by: Retropin on March 18, 2017, 07:46:51 PM

Pretty sure ive got some too