The Aussie Pinball Arcade
Aussie Pinball Forums => Technical Matters => Pinball Repairs / Problems & Assistance => Topic started by: nrh_racing on June 07, 2012, 02:55:52 PM
-
Just seeing if there is a way you can turn all globes on throughout the pinball machine. Because it's an old EM Williams i guess not but thought i would ask just in case.
It would be easier then having to go around with a 6 volt battery with some leads and go around to each globe
-
No - simply because they are all individually switched rather than all being controlled by a microprocessor.
-
The GI on the playfield is all connected in parallel so you can connect a 5V power supply and light all those at the same time .. have a close look under the playfield and you'll see where the earth and power wires run .
Same thing with the GI in the backbox .
-
Thanks and thanks