The Aussie Pinball Arcade
Aussie Pinball Forums => Technical Matters => Circuit Board Repair Guides => Topic started by: Caveoftreasures on October 16, 2011, 05:30:33 PM
-
Andy (Beaky) is working on a 1985 Gottlieb machine called "Rock" (IPDB link below)
A schematic for the sound board is required. The part number on the sound board is "24548 sound board".
Wondering if u know of a place where Andy might find a schematic for it ? We can purchase the full manual from Marco Spec, but would prefer is someone had a copy of the sound board schematic on file ? !@#
Any advice would be appreciated.
regards Brett for Andy ^^^ ^^^ (link below for the machine)
http://www.ipdb.org/machine.cgi?id=1978
-
This is a Shaq Attaq but it might have the same sound board in it??
www.homepin.com/test/sa.pdf
-
Needs to be a sys 80B schematic
-
i have a sys80b genisis,i will check for you brett #*#
-
i have a sys80b genisis,i will check for you brett #*#
genisis has the same sound board as rock ^^^
-
OK - here is a Raven (Sys80B)
www.homepin.com/test/raven.pdf
-
Just emailed over some schematics that should be useful Andrew.
-
thanks guys
I now have the schematics I need.
the next thing i may need (not sure if i need them yet) is the sound rom files for rock
-
thanks guys
I now have the schematics I need.
the next thing i may need (not sure if i need them yet) is the sound rom files for rock
You have mail