The Aussie Pinball Arcade

Aussie Pinball Forums => Technical Matters => Pinball Repairs / Problems & Assistance => Topic started by: pinball god on March 01, 2014, 09:51:56 PM

Title: tz slot machine scoop problem
Post by: pinball god on March 01, 2014, 09:51:56 PM

Insure if its a matter of reposition the scoop assembly, but very now and then the scoop release will go straight down the middle. Can there be other things attributed to this problem like playfield level, or how the coil rod hits the ball etc. I can't tell you it worked better before installing the new scoop as its also a new mirco playfield

Title: Re: tz slot machine scoop problem
Post by: ktm450 on March 01, 2014, 10:13:03 PM

You can bend the side guide a little to stop SDTM drains