The Aussie Pinball Arcade
Aussie Pinball Forums => Member Services => Sales and Services => Swinks - Pingineering => Topic started by: swinks on April 02, 2014, 09:30:08 PM
-
Here is a simple little dress mod for your 90's Bally / WMS cabinet. It is for the cabinet to slide into the start button hole that will cover any minor decal / cabinet wear from the years of pushing that Start. Just apply 2-4 small dabs of silicon glue to the back side and press into place (or use some tape to make the fit tight) and now you can hide that wear with a simple little Start Button Dress Ring. Now all you have to do is pick the material & colour and make the cabinet look like new again.
There is 2 sizes:
- 1/8 (3.175mm) front face
- 1/4" (6.35mm) front face
So you can pick the best size to suit the cabinet graphics as well as colours
https://www.shapeways.com/model/1826761/pinball-start-button-dress-ring-small-lip.html?li=my-models&materialId=62
https://www.shapeways.com/model/1831856/pinball-start-button-dress-ring-large-lip.html?li=my-models&materialId=62
-
Nice, so simple but effective! I just had a why didn't I think of that moment.
-
Classic ^^^