The Aussie Pinball Arcade
Aussie Pinball Forums => Technical Matters => Pinball Repairs / Problems & Assistance => Topic started by: Sinbad79 on September 11, 2014, 10:55:41 PM
-
Guys, looking to do a rebuild on my Galaxy slingshot and am not sure which parts are required.
Can someone please list the component part numbers i need?
Thanks
-
Marco's has the full flipper kits. http://www.marcospecialties.com/pinball-parts/B-195-LR
No doubt other sellers have the same kits also. Not sure if any aussie stores have them. I couldn't find them on RTBB.
-
I couldn't find any kits for slingshot rebuilds anywhere.
One thing i have struggled with is finding a catalogue of part numbers - does such a thing exist anywhere?
-
I couldn't find any kits for slingshot rebuilds anywhere.
One thing i have struggled with is finding a catalogue of part numbers - does such a thing exist anywhere?
Sorry, I didn't read your question properly. Sling shots vs flippers. @.@ %.%
Hopefully someone will be able to pipe in here and help you out. I obviously don't have a clue. !@)
-
I couldn't find any kits for slingshot rebuilds anywhere.
One thing i have struggled with is finding a catalogue of part numbers - does such a thing exist anywhere?
I dont think there is any such thing... could be wrong about that though !@#
i usually make my own linkages for Stern games.
-
I'm pretty sure I have a parts catalogue for stern games but as for slingshot rebuilds new coil sleeve and a good clean will make a big difference unless your linkage is stuffed
-
New sleeve a good clean and coil stop if needed. same as the flipper type, Marcos and pinball life carry them . If bush/pivot is not to flogged just clean pivot points and 1 drop of sewing machine oil after reassembly on the metal on metal pivot point only