The Aussie Pinball Arcade

Aussie Pinball Forums => Pinball Trader => Parts wanted => Topic started by: Klondike on February 16, 2015, 11:28:22 PM

Title: Williams EM Coil Stop Wanted
Post by: Klondike on February 16, 2015, 11:28:22 PM: I was hoping someone has a Williams EM coil stop for sale or knows who sells them.
I've tried RTBB, Mr Pinball & Pinballspareparts.
I think it's part number A-7255, it has quite a small 'stopper' that's rivetted, not bolted in.
I just noticed that my flippers are not opening as far on one side and then I found one of them has the wrong coil stop. @@^
Title: Re: Williams EM Coil Stop Wanted
Post by: ddstoys on February 16, 2015, 11:35:43 PM: Maybe send me
A pm tomorrow arvo about 7 and I'll
Take a look
Title: Re: Williams EM Coil Stop Wanted
Post by: Steevsee on February 17, 2015, 09:39:47 AM: I should have a used one here.
Will check today and let you know.
Title: Re: Williams EM Coil Stop Wanted
Post by: Steevsee on February 17, 2015, 10:20:54 PM: Got one!
Yours if you want it.
PM me.

EDIT
Noticed that this is not the correct stop for the flippers.
This one is from the score reels.

I have got a flipper one as well, though it's in worse condition.(second pic)
Title: Re: Williams EM Coil Stop Wanted
Post by: ddstoys on February 17, 2015, 11:09:09 PM: Is it not be of these? (http://tapatalk.imageshack.com/v2/15/02/17/398803703b7e128ded1db59c7e4f626d.jpg)(http://tapatalk.imageshack.com/v2/15/02/17/4a0ac90c8511a934ed443ef693c4d5da.jpg)(http://tapatalk.imageshack.com/v2/15/02/17/1d56511c10b43c2a0cb8dd975086f113.jpg)
Title: Re: Williams EM Coil Stop Wanted
Post by: Klondike on February 18, 2015, 02:48:57 AM: Quote from: Steevsee on February 17, 2015, 10:20:54 PM
Got one!
Yours if you want it.
PM me.

EDIT
Noticed that this is not the correct stop for the flippers.
This one is from the score reels.

I have got a flipper one as well, though it's in worse condition.(second pic)

The one in worse condition looks perfect! The screw holes are closer together which is what I need. Here's a pic of the one I have that matches;
Title: Re: Williams EM Coil Stop Wanted
Post by: ddstoys on February 18, 2015, 08:26:36 AM: Can you send some measurements?
Title: Re: Williams EM Coil Stop Wanted
Post by: Strangeways on February 18, 2015, 09:39:19 AM: Lower picture looks like

Stern (Flipper / pop bumper / sling / kicker), GTB standard with elongated holes - should be for stepper units, Bally stepper units, and the rightmost is a GTB flipper coil stop.

I'll see what I have lying around.
Title: Re: Williams EM Coil Stop Wanted
Post by: Klondike on February 18, 2015, 11:54:42 PM: Quote from: ddstoys on February 18, 2015, 08:26:36 AM
Can you send some measurements?

It's 2.5 x 2.5cm where the coil stop is and from the centre of one screw to the centre of the other is 1cm.
Title: Re: Williams EM Coil Stop Wanted
Post by: ddstoys on February 19, 2015, 12:24:36 AM: I have a box full of new old looking cool stops hopefully get time tomorroe
Title: Re: Williams EM Coil Stop Wanted
Post by: Klondike on February 26, 2015, 03:26:43 PM: Thanks again Steevsee. The coil stop arrived today and is a perfect fit! ^^^
Here's some pics the old and new and fitted. The flipper has much more travel now.
Title: Re: Williams EM Coil Stop Wanted
Post by: Steevsee on February 26, 2015, 11:22:48 PM: Quote from: Klondike on February 26, 2015, 03:26:43 PM
Thanks again Steevsee. The coil stop arrived today and is a perfect fit! ^^^
Here's some pics the old and new and fitted. The flipper has much more travel now.

You're welcome. ^^^

Good to hear it's working well now.