The Aussie Pinball Arcade

Aussie Pinball Forums => Pinball Trader => Parts wanted => Topic started by: infinite1977 on June 29, 2015, 09:23:28 PM

Title: Pinball 2000 side rails
Post by: infinite1977 on June 29, 2015, 09:23:28 PM

Anyone have a spare set of side rails they don't need. Otherwise I might look at removing mine and powder coating them

Title: Re: Pinball 2000 side rails
Post by: intopins on June 29, 2015, 09:36:57 PM

Have you tried Pinball Life...they are cheap and have most of what you need. Just hope shipping isn't to bad! Could work out cheaper than powder coating?

Title: Re:
Post by: infinite1977 on June 29, 2015, 09:39:18 PM

Think again.. but thanks for the recommendation on the site

Title: Re: Pinball 2000 side rails
Post by: pinball god on June 29, 2015, 10:19:02 PM

Mr pinball oz has them last time I looked. Powder coating will be a little difficult as I failed on my attempt. The finish is a bit hammer toned and the powder coater stuffed it completely. Then I found wayne had sets

Title: Re:
Post by: infinite1977 on June 29, 2015, 10:53:17 PM

Thanks I did try looking today but couldn't find them. I saw them on pspa  but they were $130. Thought it was a bit steep.
Mine look a bit hammer tone now lol. What about touching them up with a spray can?
Thoughts? ?

P s are they hard to remove and put back on??