The Aussie Pinball Arcade

Aussie Pinball Forums => Pinball Trader => Parts wanted => Topic started by: Spanky on March 18, 2019, 07:08:22 AM

Title: Party Animal bits
Post by: Spanky on March 18, 2019, 07:08:22 AM

Backbox bolts, translite, ramps, plastics and those funny rubber nuts that hold the plastics on. 

Title: Re: Party Animal bits
Post by: Crashramp on March 18, 2019, 07:20:38 AM

Rubber nuts are here
https://www.rtbb.com.au/product/post-cap-23-6543/ (https://www.rtbb.com.au/product/post-cap-23-6543/)


Bolts to hold the back box to the cabinet are available from Bunnings 3/4” x 5”. I think the 3/4” x 4” maybe long enough too but not sure.

Title: Re: Party Animal bits
Post by: Crashramp on March 18, 2019, 07:25:53 AM

Bolts look like this
(https://uploads.tapatalk-cdn.com/20190317/986ac5f98c8bd16b6cb6a4e2675bddc5.jpg)
You can buy them individually or in a box


Sent from my iPad using Tapatalk

Title: Re: Party Animal bits
Post by: Spanky on March 18, 2019, 08:10:59 AM

Thanks, also a coin door lock

Title: Re: Party Animal bits
Post by: Crashramp on March 18, 2019, 09:55:05 PM

Quote from: Spanky on March 18, 2019, 08:10:59 AM

Thanks, also a coin door lock

Coin door lock here.

https://www.rtbb.com.au/product/coin-door-lock-standard/

Title: Re: Party Animal bits
Post by: Strangeways on March 20, 2019, 09:39:15 PM

I don't believe the plastic set is available, or the ramp.

Title: Re: Party Animal bits
Post by: Spanky on October 04, 2021, 09:24:03 AM

Thank you.  Next, a backbox lock. The thing that secures the translite. Is it A-13379? 
And blue plastic playfield posts, 0017-00042-0586
0017-00042-0594

Title: Re: Party Animal bits
Post by: Strangeways on October 06, 2021, 08:34:36 PM

Lock - https://www.rtbb.com.au/?s=A-13379 (https://www.rtbb.com.au/?s=A-13379)


Posts - I think they are similar to "Dungeons and Dragons" (finned)  - BUT - You will need to confirm the size - https://www.rtbb.com.au/?s=finned (https://www.rtbb.com.au/?s=finned)

Title: Re: Party Animal bits
Post by: Spanky on October 13, 2021, 08:30:18 AM

Thanks!