The Aussie Pinball Arcade

Aussie Pinball Forums => Technical Matters => Pinball Repairs / Problems & Assistance => Topic started by: wicked on June 18, 2009, 11:15:49 PM

Title: Tilt Problem.
Post by: wicked on June 18, 2009, 11:15:49 PM

Hi All.
I recently moved house and we moved my pinball machine. It's a 1978 Kiss Bally Machine.
We had no problem moving it and didn't damage it at all and kept it upright at all times.
When I turned it on in the new place it comes up with "Tilt" straight away and won't start a game.
Has anyone got any sugggestions..?

Thanks
Ange...

Title: Re: Tilt Problem.
Post by: Ford Fairlane on June 18, 2009, 11:18:52 PM

Happened to me when i got my em home. The tilt plomb was bumped around and of course was still making contact with the ring around it. Moved it so it wasnt touching and sweet!. Not sure about ss, are they the same?

Title: Re: Tilt Problem.
Post by: Strangeways on June 18, 2009, 11:21:20 PM

Quote from: Ford Fairlane on June 18, 2009, 11:18:52 PM

Happened to me when i got my em home. The tilt plomb was bumped around and of course was still making contact with the ring around it. Moved it so it wasnt touching and sweet!. Not sure about ss, are they the same?

most likely the problem - or the tilt ball (in the assembly) is all the way to the back of its travel - which is causing the tilt switch to stay on. The ball should be rolled to the front of the machine - if that makes sense ?