The Aussie Pinball Arcade

Aussie Pinball Forums => Technical Matters => Pinball Repairs / Problems & Assistance => Topic started by: AndrewGB on August 19, 2020, 11:28:40 PM

Title: Party Zone - DMD not centered
Post by: AndrewGB on August 19, 2020, 11:28:40 PM

Hi all.  I've only had my PZ for about 2 months now and I've noticed that the DMD does not seem to be centred within the translite and you can clearly see the circuit board.  Does anyone have any ideas as to how I can fix this?  Is it worth trying to move the lamp board mounts across somewhat as it seems to have a fair bit of empty space on the right hand side of the light board?  If anyone can post a picture of their setup would be appreciated. 


Thanks.


 :pinball:

Title: Re: Party Zone - DMD not centered
Post by: Strangeways on August 22, 2020, 06:28:47 PM

Looks like it was done at the original factory. Just move it across. The other thing to check is that the light board itself can be adjusted at the hinges ?

Title: Re: Party Zone - DMD not centered
Post by: AndrewGB on August 24, 2020, 09:01:27 PM

Thanks, I'll look into it further but was hesitant in moving the light board.  If it's easily adjustable then I won't be worried as much.


Interestingly, the original DMD had lines through it and filled the space.  I had requested for the DMD to be changed and the seller (business) had assured me that the replacement DMD is the correct one.  I do need to get them over once restrictions are eased to have a look at some other minor items so hope the tech can check it out again.


 :pinball:   

Title: Re: Party Zone - DMD not centered
Post by: AndrewGB on November 10, 2020, 09:29:15 PM

Thanks Nino, have now moved the light board and all centred.


 :pinball: