The Aussie Pinball Arcade

Aussie Pinball Forums => Technical Matters => Pinball Repairs / Problems & Assistance => Topic started by: pinball-collector on August 02, 2009, 09:22:32 PM

Title: Adams Family
Post by: pinball-collector on August 02, 2009, 09:22:32 PM

hello,,pinballers,,l have a AF,,,the problem is,,,l click up credits from inside the coin door,,credits show up on the display,,credit button flashes,,when l push the buton,,nothing happens?, would it be just the switch, behing the button,,orrrrr?  thanx

Title: Re: Adams Family
Post by: The pinballist formally known as Dean Morgan on August 02, 2009, 09:25:05 PM

Could be a few things, but yes check the switch hasnt come away from the button housing..

Are all the balls in place, none stuck anywhere,

Could also be connector issue on CPU board

Title: Re: Adams Family
Post by: pinball-collector on August 02, 2009, 10:53:05 PM

Thank you,,,if the ball was stuck,,lm sure it will say,, Ball Missing,,  will check the switch,,thanx

Title: Re: Adams Family
Post by: silverball on August 02, 2009, 11:02:14 PM

If the switch hasnt dislodged from the button,make sure that it is engaging the microswitch. Also check that a wire (spade connector) at the switch isnt off or loose.