The Aussie Pinball Arcade

Aussie Pinball Forums => Pinball Trader => Parts wanted => Topic started by: pinnies4me on October 02, 2009, 11:55:02 PM

Title: Pop Bumper Driver Baords
Post by: pinnies4me on October 02, 2009, 11:55:02 PM
Started putting the HH together tonight. One thing not previously tested were the PBDB (4) because I didn't have the pops themselves in place when I did an initial test of most things. Sure enough, four out of five don't work! The fifth is one I put in for the basement upkicker, and that's fine - it was a board I had, not in the game and subject to the corrosion issues dealt with elsewhere. The traces on them are corroded under the seal, and I suspect that's the issue as the components are all new. One doesn't work, one locks on when activated, and two just lock on immediately.

So chasing four clean boards (got the components to rebuild them if they need it). Happy to buy singly if any members have one or two pares.
Title: Re: Pop Bumper Driver Baords
Post by: MartyJ on October 03, 2009, 07:37:10 AM
My four best ones went to Rollerball.....I think there is another 2 somewhere which will need rebuilding...I'll let you know.
Title: Re: Pop Bumper Driver Baords
Post by: pinnies4me on October 03, 2009, 08:41:38 AM
Quote from: MartyJ on October 03, 2009, 07:37:10 AM
My four best ones went to Rollerball.....I think there is another 2 somewhere which will need rebuilding...I'll let you know.

Thanks mate, I have the parts to rebuild them so happy to buy the boards as is.
Title: Re: Pop Bumper Driver Baords
Post by: MartyJ on October 03, 2009, 08:52:46 AM
'Ahh negative on that Ghostrider'...

No cost, just PM me your addy again and I'll mail them Monday.
Title: Re: Pop Bumper Driver Baords
Post by: The pinballist formally known as Dean Morgan on October 03, 2009, 09:40:28 AM
Homepin is also selling a replacement Pop Bumper Boards here in Aus that I highly recommend if you cant get enough originals.

Title: Re: Pop Bumper Driver Baords
Post by: pinnies4me on October 03, 2009, 10:58:20 AM
Quote from: The pinballist formally known as Dean Morgan on October 03, 2009, 09:40:28 AM
Homepin is also selling a replacement Pop Bumper Boards here in Aus that I highly recommend if you cant get enough originals.

Thanks Formally Known, will keep that in reserve.

Quote from: MartyJ on October 03, 2009, 08:52:46 AM
'Ahh negative on that Ghostrider'...

No cost, just PM me your addy again and I'll mail them Monday.

Thanks Marty!