The Aussie Pinball Arcade
Aussie Pinball Forums => General Discussion => General Pinball Discussion => Topic started by: Ant68 on December 11, 2008, 08:16:37 AM
-
$.$
Guys I'm in the market for a STTNG ,can anyone give me some tips of things to look out for with this pin,problem areas ,wear areas etc .
Really appreciate
Ant
<..>
-
Ant,
most common things to look for on a STTNG are the 3 green kidney shaped inserts, on the centre of the playfield, almost always have some sort of crazing,cracking or something wrong with them, the neutral zone hole is usually beat because of the gun launchers and these plastics ( link below) are usually broken.
http://www.pinballheaven.co.uk/shop/product_info.php?products_id=535&osCsid=45e82aa831e4245466e9aa34d468c360
Also this game has alot of opto switches so check to see if they are all functioning.
hope this helps...
-
Thanks heaps
-
There's a lot i left out, however i have seen that it has been covered on another forum.
Good luck with your purchase, STTNG is a hell of a game !
-
$.$
Guys I'm in the market for a STTNG ,can anyone give me some tips of things to look out for with this pin,problem areas ,wear areas etc .
Really appreciate
Ant
<..>
-The wiring to the guns are a problem as the harness gets worn when the guns rotate. -The plastics are typical...look them over real good.
-Ramps, they are prone to cracks as most are but make sure you also check the subway ramp. It gets a lot of abuse. (the subway also has about a dozen optics as well).
-The drop target in the back...check it out thorougly as it is usually in bad shape mechanism wise.
-The "bird of prey" ship. Ususally broke.
-Check the Borg ship for warping. (no not speed, the shape).
-The cabinet is prone to fading.
-
-The wiring to the guns are a problem as the harness gets worn when the guns rotate. -The plastics are typical...look them over real good.
didn't know that
-
Brilliantly engineered game.. But it is boring - Just my 5 cents !!!
Watch out for the AUX DRIVER board as well. The TIP 102s are nearly ALWAYS blown off the board. If the voltages is missing from either the two diverters, drop target or up target coils then the game will not play correctly. You can tell if there is an issue because the fuse will blow and then balls will be continually served.. Just going off memory here, but I don't think I've EVER played a working game...
-
Also check the up kickers to the wireforms. Make sure the ball gets all the way up, as these can be a troublesome and constant problem if not adjusted properly.
-
Thanks for the help guys I really appreciate it,seen a few now but all are showing wear around the center green/blue inserts .I don't mind paying a little extra for a close to minty one .Keep your ears to the ground for me #*# #*#
also in the market for a minty LOTR $%$
Happy new year to all and may we all have good health and plenty new pins come our our way . #*# #*#
-
ask Nino more about these he has done a few
we re wire ALL the guns as you cant make them 100% without this.
jsut one small break and they only work 9 out of 10 times
better to take the few extra hours and do this properly
i had 3 in stock 2 sold the week before christmas
the last one is at Ninos and he says it will be ready this weekend .....
then I might give him BOTH the LOTRs i have 1 is already sold to a member here too ... well maybe if he is nice to me
mark
-
ask Nino more about these he has done a few
we re wire ALL the guns as you cant make them 100% without this.
jsut one small break and they only work 9 out of 10 times
better to take the few extra hours and do this properly
i had 3 in stock 2 sold the week before christmas
the last one is at Ninos and he says it will be ready this weekend .....
then I might give him BOTH the LOTRs i have 1 is already sold to a member here too ... well maybe if he is nice to me
mark
Subway Ramp optos and diverters MUST be working, Cannons MUST be re wired, BRs and Caps on the Driver board MUST be replaced. The opto boards on the ball trough assy MUST be working...
A hell of a lot of work for a game I don't like - I think you HAVE to be a trekkie...