The Aussie Pinball Arcade
Aussie Pinball Forums => Technical Matters => Handy hints and tips => Topic started by: Extra Ball on April 22, 2010, 01:08:07 PM
-
My South Park was missing the toppers, pretty common kids knock em off, or they get broken. I have sourced a NOS Cartman topper toy (hopefully on its way from the USA), and decided to make my own text topper as these dont seem to be available.
This is this mornings effort, found a half-decent pic of one from an old ebay listing, mucked around with the contrast, and I think it printed ok. Then I used some old perspex I had in the shed, and sandwiched the print between. Legs are from bunnings, 30 cents each. Whole thing cost me 1.50 I reckon, and whilst its a not as good as an original its decent enough for me. Oh the cartman will owe me 32 bucks with postage, and the toppers will probably add 200 bucks value to the machine :cool:
(http://i41.photobucket.com/albums/e260/Gwind/spheaders005.jpg)
Example of an original:
(http://www.arcadegamesuperstore.com/images/classic-pinball/south-park-pinball-bg1.jpg)
-
Well done Greg . Looks OK to me . You decided against going for the four figures under a topper dome then ??
Great work mate .
-
I think that if can go original then you should. If I wasnt able to source the cartman toy I wouldve went with my custom idea.
-
Looks great mate. Toppers are always a great personal touch to any machine.
Bargains on ebay everywhere. ^^^ Well done. Looks like the original to me. ^^^ ^^^ ^^^
-
Looks M'kay
Red
-
NOS and 34 bucks posted from the USA, and Cartman sits proudly on top again ()
(http://i41.photobucket.com/albums/e260/Gwind/sptoppernew003.jpg)
-
Looks great, Greg - really adds that final touch to the machine. Looks really good !