The Aussie Pinball Arcade
Aussie Pinball Forums => Technical Matters => Pinball Repairs / Problems & Assistance => Topic started by: illawarra_steelers on January 08, 2009, 11:03:14 AM
-
Have been wanting to do the final stages of the Apollo respray but the weather has not been kind so started on another rebuild last night on my Gottlieb Goucho from 1963. This game has a roto target which was pulled apart last night. So I will need to do the numbering on the targets faces again as they are hammered. So went to download the targets to take them to a print shop to print off on white adhesive backed paper.
Do you think I can open the file? Can anybody help?
All I need is the file opened and returned to pinballoz@yahoo.com
http://marvin3m.com/roto/index.htm
I have tried to load (and to extract the files) using PKUNZIP as in the guide with zero luck
Thanks in advance if anybody can help!!!
-
I used Winrar to extract the first file - it was a *.pcx file. I don't have any application that opens that *.pcx file..
-
Tony, you need something like Irfanview to view the PCX files. Anyway, I have converted them to JPG for you and attached them. Hope it's what you want.
-
Thanks Tony ^^^
Perfect and just what was needed!
-
Just one more question....if I take this to a print shop (Officeworks here has one) what do I ask for?
Any suggestions what to get it printed out on?
-
I usually print on white adhesive paper and then mylar over thtop ?
-
Dont bother with Officeworks,was in there last week & asked if they could print some apron bally art on self adhesive photo paper - they couldnt & they dont have A4 self adhesive paper -so to cut a long story short I purchased 100 sheets off ebay. The only thing is you can only use a inkjet printer (Not sure how the mylar will affect the ink).Let me know if you want me to print some tonight for you try - Havent printed anything yet,not sure how they will come out.
Millsy (Youre Local Printer)
-
Thanks for the offer Kev, muchly appreciated!
Will make some calls over the next few days and see what I come up with.
Also seeing you are only 2 mins away about time you came over for a visit ^^^
-
Just needed an excuse (only kidding)
Millsy
-
Just needed an excuse (only kidding)
Millsy
Kev,
PM sent
-
I've used transparent adhesive on targets, then mylared - it looked great on my inkjet
-
Whats the difference between transparent adhesive and self adhesive photo paper ?
Millsy
-
Whats the difference between transparent adhesive and self adhesive photo paper ?
Millsy
I don't really know - other than the adhesive transparent stuff I used was SUPER thin.. I think I got it from officeworks.
-
I usually print on white adhesive paper and then mylar over thtop ?
Surely I can take the file to some printer and get these made as per the decals PBR offers?
http://www.pbresource.com/plastic/gtb-rotoscow.jpg
This would eliminate the need to reapply mylar over the top?
Also I am just about to clean up 3 stationary targets for this game and hopefully be able to do the same.
-
I usually print on white adhesive paper and then mylar over thtop ?
Surely I can take the file to some printer and get these made as per the decals PBR offers?
http://www.pbresource.com/plastic/gtb-rotoscow.jpg
This would eliminate the need to reapply mylar over the top?
Also I am just about to clean up 3 stationary targets for this game and hopefully be able to do the same.
Of course you can - We are just tight asses !!!
Try Snap Printing - they were cheap when I needed to do an Apron.