The Aussie Pinball Arcade

Aussie Pinball Forums => Technical Matters => Pinball Repairs / Problems & Assistance => Topic started by: Retropin on February 12, 2011, 12:10:47 AM

Title: Zaccaria - Relays
Post by: Retropin on February 12, 2011, 12:10:47 AM

Anyone know what the 2 relays on a Zac power board are?

 neither of mine are pulling in ( which suggests a different fault i  know).. in case i need to replace both are they available locally?


Actually, while posting this, ive realised i can just add a diode between the pins on flipper connectors CN2 and CN3... would act exactly the same as the relays once pulled in...

Mmmmm.


LOL- still would like to know though!

Title: Re: Zaccaria - Relays
Post by: pulstar on June 11, 2011, 08:00:08 PM

Relays on the Power board are the L & R enable relays for the Flippers. If your flippers are working then these are working. They also click on and off during the LAMP self test and if you hold the Flipper buttons the flippers also cycle on and off. I think they have a 24v coil.