The Aussie Pinball Arcade
Aussie Pinball Forums => Technical Matters => Pinball Repairs / Problems & Assistance => Topic started by: Aimef on April 06, 2012, 09:09:17 PM
-
Hi all,
Picked up a High Speed during the week and found that some one had put a fliptronic type of board on each flipper.
I found that there was no wiring from the board to the flippers. So i removed the boards as I couldn't find any info on them.
I then rewired the flippers back to normal, the found the BR on the flipper power board was shot, so I replaced that.
So after all of that the Lh flipper works fine, but as soon as i hit the Rh flipper it pops the fuse.
Any help would be great thanks