The Aussie Pinball Arcade
Aussie Pinball Forums => Technical Matters => Pinball Repairs / Problems & Assistance => Topic started by: beaky on November 19, 2012, 08:26:20 PM
-
Does any one have a copy of the L2 game rom for WMS flash?
i can only find the L1 version on the net.
If the L2 version is installed the credit / ball display will show "0486 2" when the advance button is pressed.
all the manuals i can find are for the L2 version so the game adjustment table in the manual is different to what is in the rom
-
This was recently discussed on Pinside. Probably easier to link than try to explain.
Looks like only L-2 will work in a Sys 4 board with yellow flipper ROMS.. the only green flipper ROM version known to exist is L-1.
http://pinside.com/pinball/forum/topic/williams-flash-system-4-rom-question
-
Yes the game adjustment table has a couple of the settings mixed up.
I have it written down somewhere, but play around with the settings and i'm sure you'll figure it out.