The Aussie Pinball Arcade

Aussie Pinball Forums => Pinball Trader => Pinballs wanted => Topic started by: swinks on October 22, 2014, 11:35:40 PM

Title: wanted - project pin
Post by: swinks on October 22, 2014, 11:35:40 PM
after a project pin to play around with:
- Williams / Bally
- late 80's to early 90's
- working
- playfield does not have to be perfect

let me know what you have that might fit the bill.
Title: Re: wanted - project pin
Post by: Homepin on October 23, 2014, 01:18:55 PM
From a post on AA:

http://www.aussiearcade.com.au/showthread.php/69034-%28QLD%29-FS-Stern-Nuget-%28CRAP-CONDITION%29

Stern Nugent
i paid way to much for it. $500 and to be honest its probably going to be out of my league to restore so somebody might have better luck than me
its complete, it fired up but would not start, 2 displays are a bit dodgy
lot of ware marks
have heaps of photos

any offers or what you reakon its worth

its located in nth qld but i will be traveling to brissy next couple of months so can bring down
its all packed for transport so only photos now
Title: Re: wanted - project pin
Post by: swinks on October 23, 2014, 02:19:14 PM
thanks mike   ^^^  , not quite what I was looking for, as want some ramps etc and be a bally / wms
Title: Re: wanted - project pin
Post by: studley67 on October 23, 2014, 04:10:28 PM
haha,spelling guru,wear marks
Title: Re: wanted - project pin
Post by: Homepin on October 23, 2014, 04:53:04 PM
haha,spelling guru,wear marks


I just did a cutNpaste - I didn't check for spelling or accuracy... *.*
Title: Re: wanted - project pin
Post by: studley67 on October 23, 2014, 04:58:29 PM
lol,all good mike,i have the worst spelling on the forum and people tend to make a big deal about it.The australian education system has a lot to answer for.Not to mention the american spell check on the forum.
Title: Re: wanted - project pin
Post by: Retropin on October 23, 2014, 09:14:46 PM
haha,spelling guru,wear marks


I just did a cutNpaste - I didn't check for spelling or accuracy... *.*

Cut and Paste from AA is naughty boy territory...
Title: Re: wanted - project pin
Post by: swinks on October 23, 2014, 09:38:47 PM
haha,spelling guru,wear marks


I just did a cutNpaste - I didn't check for spelling or accuracy... *.*

Cut and Paste from AA is naughty boy territory...


 %.% %.%


anyone have or know of project pin, swords of fury, black knight 2000.... even special force - oscar has to keep his in the auction
Title: Re: wanted - project pin
Post by: Caveoftreasures on October 23, 2014, 11:26:10 PM
haha,spelling guru,wear marks


I just did a cutNpaste - I didn't check for spelling or accuracy... *.*

Cut and Paste from AA is naughty boy territory...

Everyone is a naughty boy on here. Lol

Title: Re: wanted - project pin
Post by: Caveoftreasures on October 23, 2014, 11:29:35 PM
What's a Black Knight 2000 worth these days in pretty good nick. ?
Title: Re: wanted - project pin
Post by: spacejam0 on October 24, 2014, 01:26:41 PM
What's a Black Knight 2000 worth these days in pretty good nick. ?
I think a nice one (I sold one earlier this year) around the $2500 mark would be about right
Title: Re: wanted - project pin
Post by: Retropin on October 24, 2014, 07:02:24 PM
BK2000?... Want to swap for an Earthshaker?
Title: Re: wanted - project pin
Post by: pinball god on October 24, 2014, 07:38:28 PM
haha,spelling guru,wear marks


I just did a cutNpaste - I didn't check for spelling or accuracy... *.*

Cut and Paste from AA is naughty boy territory...


 %.% %.%


anyone have or know of project pin, swords of fury, black knight 2000.... even special force - oscar has to keep his in the auction
is Oscar's clearance an auction or straight out sale price?
Title: Re: wanted - project pin
Post by: GORGAR 1 on October 24, 2014, 07:56:45 PM
haha,spelling guru,wear marks


I just did a cutNpaste - I didn't check for spelling or accuracy... *.*

Cut and Paste from AA is naughty boy territory...


 %.% %.%


anyone have or know of project pin, swords of fury, black knight 2000.... even special force - oscar has to keep his in the auction
is Oscar's clearance an auction or straight out sale price?

Sounds like a straight out sale but I'm not sure! that's what I got from his post.
Title: Re: wanted - project pin
Post by: swinks on October 24, 2014, 08:01:16 PM
oscars is a auction as has to keep them them for the event

yes open for a earthshaker as well
Title: Re: wanted - project pin
Post by: Strangeways on October 24, 2014, 08:03:28 PM
I have a Special Force in playable condition - is STILL a project pin that needs work. Happy to let it go to a good home for $1000.

Faded cab, some insert wear, backglass good. PM for pics..

edit - Dropped price to $1000.
Title: Re: wanted - project pin
Post by: Caveoftreasures on October 24, 2014, 11:52:43 PM
BK2000?... Want to swap for an Earthshaker?

Sold already Gav. I had a phone call five minutes after posting otherwise it would have been yours. Earth shaker is a excellent title.
Title: Re: wanted - project pin
Post by: dealers choice on October 25, 2014, 02:00:27 AM
Jady, If you decide to buy off Nino, I am going to Melbourne late December. If you can wait, I'll bring it back for free as I intend to see the new home of APR.  ^^^
Title: Re: wanted - project pin
Post by: Retropin on October 25, 2014, 10:05:52 AM
BK2000?... Want to swap for an Earthshaker?

Sold already Gav. I had a phone call five minutes after posting otherwise it would have been yours. Earth shaker is a excellent title.

Remember yours being a very nice example... new owner will be very happy, its a great game
Title: Re: wanted - project pin
Post by: Strangeways on October 25, 2014, 10:59:26 AM
Jady, If you decide to buy off Nino, I am going to Melbourne late December. If you can wait, I'll bring it back for free as I intend to see the new home of APR.  ^^^

fine with me !

I'm sending Jady photos and a condition report tonight.
Title: Re: wanted - project pin
Post by: swinks on October 25, 2014, 12:13:43 PM
Jady, If you decide to buy off Nino, I am going to Melbourne late December. If you can wait, I'll bring it back for free as I intend to see the new home of APR.  ^^^

Thanks Bren, I might take you up on the kind offer  ^^^


Jady, If you decide to buy off Nino, I am going to Melbourne late December. If you can wait, I'll bring it back for free as I intend to see the new home of APR.  ^^^

fine with me !

I'm sending Jady photos and a condition report tonight.

Cheers Nino

I will check out the photos and we can go from there.  ^^^




but if anyone else knows of a police force, black knight 2000 or swords of fury, I would be keen on one of those also, if the opportunity comes I may take ninos and another.....?????
Title: Re: wanted - project pin
Post by: oldskool1969 on October 25, 2014, 12:16:10 PM
Yaaaay Swinksy mate, rougher the better if you ask me! its like the ugly duckling syndrome.
Title: Re: wanted - project pin
Post by: swinks on October 25, 2014, 12:47:47 PM
Yaaaay Swinksy mate, rougher the better if you ask me! its like the ugly duckling syndrome.


hahaha  %.%

except that sweet surf champ playfield - best one I have ever seen....
Title: Re: wanted - project pin
Post by: dealers choice on October 26, 2014, 06:31:23 PM
Right on Oldskool  ^^^ cant wait to apreciate the effort put in on my Skylab
Title: Re: wanted - project pin
Post by: Strangeways on October 26, 2014, 06:47:32 PM
Photos and report sent - you have email !

 *%*
Title: Re: wanted - project pin
Post by: swinks on October 27, 2014, 07:37:31 AM
thanks nino for the photos but for my purpose of a re-theme this game is too nice (the playfield is in pretty decent shape) - I need a game with a worn playfield so I then don't feel bad.
Title: Re: wanted - project pin
Post by: dealers choice on October 27, 2014, 10:15:13 PM
I  just checked out  Bally Special force on you tube. what a great machine, definately too good to re theme IMO
Title: Re: wanted - project pin
Post by: Strangeways on October 27, 2014, 11:30:20 PM
I  just checked out  Bally Special force on you tube. what a great machine, definately too good to re theme IMO

It has a bad rep for the artwork, but it is a cracker to play.
Title: Re: wanted - project pin
Post by: dealers choice on October 27, 2014, 11:46:46 PM
can you send me the info you sent Jady please nino. I might be bringing it home anyway. its hard to find anything for $1000 up here mate.
pm sent
Title: Re: wanted - project pin
Post by: Strangeways on October 28, 2014, 12:18:21 AM
You have email !

 ()
Title: Re: wanted - project pin
Post by: dealers choice on October 30, 2014, 09:56:49 PM
Thanks Nino, looking forward to meeting you when I pick it up  ^^^
Title: Re: wanted - project pin
Post by: swinks on October 30, 2014, 10:06:33 PM
congrats Bren and Nino at least it worked for you guys  ^^^
Title: Re: wanted - project pin
Post by: Strangeways on October 30, 2014, 11:59:17 PM
Thanks Nino, looking forward to meeting you when I pick it up  ^^^

Likewise !

congrats Bren and Nino at least it worked for you guys  ^^^

Great project heading off to a good home - could not agree more !
Title: Re: wanted - project pin
Post by: dealers choice on October 31, 2014, 12:26:43 AM
thanks Jady for enquiring about a project. sorry it wasn't what u wanted. but it opened another door for me.  ^^^ looking forward to picking it up.
Title: Re: wanted - project pin
Post by: pinball god on October 31, 2014, 09:49:04 PM
thanks Jady for enquiring about a project. sorry it wasn't what u wanted. but it opened another door for me.  ^^^ looking forward to picking it up.
give us a quick review after a few games. And good luck with the resto
Title: Re: wanted - project pin
Post by: dealers choice on November 01, 2014, 01:40:13 PM
No probs Rob. Not sure if this will be a big restored job. Probably do what I have to at the moment.