The Aussie Pinball Arcade

Aussie Pinball Forums => Pinball Mods => General Mods => Topic started by: swinks on July 24, 2015, 09:32:53 PM

Title: **Music Pin Plunger Plate & Knob Mod**
Post by: swinks on July 24, 2015, 09:32:53 PM

Here is new mod that I have been tinkering around with which will suit any music pin - AC/DC, Metallica, KISS and will fit the Bally and WMS plunger housing as well as has a recess in the back to clear that mold mark.

It can either be fixed via 3m double sided tape or epoxy glue into the recess of the shooter housing.

In addition I will offer a custom shooter which is similar to the Marshall Volume knob that you can crank it to 11.

As for the logo - that will probably change to a custom logo to something unique but symbolic.

Curious on peoples thoughts what they think or any suggestions to finish it off to people's likings.

Title: Re: **Music Pin Plunger Plate & Knob Mod**
Post by: pinball god on July 24, 2015, 10:20:48 PM

I like it very much especially because its very creative and utilizing all of the plunger mech and not just the rod. Very impressed and should be a winner in my opinion

Title: Re: **Music Pin Plunger Plate & Knob Mod**
Post by: pinnies4me on July 24, 2015, 10:21:29 PM

I don't have a music pin, but that is really neat!

Title: Re: **Music Pin Plunger Plate & Knob Mod**
Post by: swinks on July 25, 2015, 09:10:39 AM

cheers guys, what do you reckon, a tan cloth version?

as for pricing, one option will be around $13.50 USD for the plate and just ordered some Marshall knobs to see if I can use those for a shooter knob for a authentic feel and look.

Title: Re: **Music Pin Plunger Plate & Knob Mod**
Post by: swinks on July 25, 2015, 04:00:45 PM

here is the final design, has 2 coloured switches on the lhs with a extra knob and on the rhs is one less knob but a coloured input jack hole.