The Aussie Pinball Arcade

Aussie Pinball Forums => General Discussion => Non-pinball (other coin opp) => Topic started by: piesrule on December 11, 2015, 08:42:58 PM

Title: Jukebox repairs / servicing
Post by: piesrule on December 11, 2015, 08:42:58 PM
Hello all, does anyone repair or know any anybody that can service a J100 1950's Seeburg jukebox in the Eastern suburbs of Melbourne? Thanks.
Title: Re: Jukebox repairs / servicing
Post by: benpin on December 11, 2015, 11:39:08 PM
 Coinplay Australia in Mulgrave , speak to Gunnar.

 Ph. 1800 333 350

 Hope,  he can help you

Title: Re: Jukebox repairs / servicing
Post by: Retropin on December 12, 2015, 12:02:11 AM
Pain in the arse.. 99% of problems are through faulty grounding on the numerical keyboard. Its not a hard job to do but it is extremely frustrating
Title: Re: Jukebox repairs / servicing
Post by: piesrule on December 12, 2015, 11:29:33 AM
Pain in the arse.. 99% of problems are through faulty grounding on the numerical keyboard. Its not a hard job to do but it is extremely frustrating
The problem is in selecting the record it doesn't always select when it should although when it passes the selection you can hear a click like its meant to stop there, it does find it eventually sometimes after about 3 or 4 passes. Its a Seeburg J100 if that helps.
Title: Re: Jukebox repairs / servicing
Post by: Strangeways on December 12, 2015, 11:27:19 PM
Going on memory here - is the selector unit easily removed ? It might be a case of removing it, checking if the pins are easily moving "in and out" and then re seating. I might have this confused with a Tropicana or Continental II. But the concept is the same. It should be an adjustment.