The Aussie Pinball Arcade
Aussie Pinball Forums => Technical Matters => Pinball Repairs / Problems & Assistance => Topic started by: Crashramp on January 18, 2018, 10:19:40 PM
-
Hi guys,
Are these the right switches to use on Bally Williams DMD era sling shots? Originals seem to be riveted to a bracket. I assume I’d just drill out the rivet and use a small nut and bolt to mount the new switch to the old bracket?
http://www.rtbb.com.au/catalog/product_info.php?cPath=44_158&products_id=156 (http://www.rtbb.com.au/catalog/product_info.php?cPath=44_158&products_id=156)
Cheers
Adam
-
They are the correct switches -120 and -114. However, there is a set you can buy with both switches already mounted on a bracket. They are riveted on. I used to replace the switches on the old bracket, but it is less fiddly to use the set which is already riveted and ready to go. We are out of stock, but more will be here at the end of next week.
-
They are the correct switches -120 and -114. However, there is a set you can buy with both switches already mounted on a bracket. They are riveted on. I used to replace the switches on the old bracket, but it is less fiddly to use the set which is already riveted and ready to go. We are out of stock, but more will be here at the end of next week.
Great, thanks Nino, I’ve a bunch of other stuff in my cart at the moment but I’ll wait for them to come back in stock before placing an order.