The Aussie Pinball Arcade
Aussie Pinball Forums => Technical Matters => Circuit Board Repair Guides => Topic started by: andtan on July 29, 2012, 08:52:58 PM
-
Hi guys,
Can anyone help me with some measurements for the TIP36C heatsink on a Fliptronic II board? I've looked for the part number 01-10572, but can't find one. I just need the length, width, and thickness, so I can make one up - I assume that it's aluminum?
I'm also after one of those little black retaining plugs that hold the TIP102's to the board.
If anyone has a spare board (it doesn't have to work) with heatsink they want to part with please let me know.
Cheers,
Andy
-
The aluminium heatsink is 79mm long x 21mm wide x 3mm thick.
My board doesn't have the black plastic fittings that retain the TIP102's - they are just bent over and soldered in place. I wouldn't panic about them really.
-
Thanks Mike ^^^