The Aussie Pinball Arcade

Aussie Pinball Forums => Technical Matters => Pinball Repairs / Problems & Assistance => Topic started by: andtan on October 10, 2012, 06:44:55 PM

Title: Help with Getaway part numbers
Post by: andtan on October 10, 2012, 06:44:55 PM

Hi guys,

Can anyone with a HS2 help me with a couple of part numbers?

In the attached photo I'm trying to work out the correct star post, and post just to the left of the bumber - the blue post circled in yellow. On my HS2 the post is missing and after looking at the manual I'm not sure if it is supposed to be a single or double rubber clear star post, and I have no idea which is the correct post that holds it down  !@#

Cheers,

Andy

Title: Re: Help with Getaway part numbers
Post by: ktm450 on October 10, 2012, 07:38:33 PM

It should be a clear double post, and the one directly beside the pop a metal double post

Title: Re: Help with Getaway part numbers
Post by: Greg on October 10, 2012, 07:40:59 PM

I dont know whats the correct size  but that blue post is wrong it actually looks like a Finn post

Title: Re: Help with Getaway part numbers
Post by: andtan on October 10, 2012, 08:09:03 PM

Sorry, @.@ the picture is actually from IPDB - I wish my playfield was that nice!!

So if it's a 'Double Star Post, Clear' (p/n: 03-8247-13) what is the correct metal post used to secure it?

Title: Re: Help with Getaway part numbers
Post by: Homepin on October 10, 2012, 08:53:04 PM

Mine uses a crappy wood screw - and before you ask - YES, I did replace the rings before re-fitting the post  <.>


(http://www.homepin.com/test/gw1.jpg)


(http://www.homepin.com/test/gw2.jpg)


(http://www.homepin.com/test/gw3.jpg)

Title: Re: Help with Getaway part numbers
Post by: ktm450 on October 10, 2012, 09:05:03 PM

Yep mine is like Mikes from memory, just a wood screw

Title: Re: Help with Getaway part numbers
Post by: andtan on October 10, 2012, 09:17:17 PM

Thanks guys,

If there's no no more bidding, then a wood screw it'll be ^^^