The Aussie Pinball Arcade
Aussie Pinball Forums => Pinball Mods => Gottlieb => Topic started by: swinks on November 21, 2012, 07:58:44 PM
-
One of the highlights of this year's Northern Lights Pinball 2012 event in Manchester was the debut of a Gottlieb Haunted House machine with some special modifications.
to read and learn more go to this link
http://www.pinballnews.com/learn/hauntedhouse/index.html
You need the following parts to do this multiball modification
Two ball-release solenoid and mechanisms
Wire guides
Schottky diodes BAT 42, 43 or 85
Two new switches
One-way gate for the upper playfield
One-way gate for the trough
Double-post for fitting above the trough
PI-80 board
Fabricate a metal guide bracket for the lower playfield
Mini-post for the extra ball lock (I chose to not fit one, but Pascal did)
Various lengths of cable and two fuse holders
Patience!
-
A couple of years ago when I still had my HH a few of us at my place for a meet talked about this very possibility with the Pascal board, and how easy it would be (in relative terms) to do. HH is a great game to look at, and lots to do, but really lacks something, and this should tern into a game worth having I suspect.