The Aussie Pinball Arcade

Aussie Pinball Forums => Technical Matters => Pinball Repairs / Problems & Assistance => Topic started by: 4_amusement_only on January 07, 2013, 02:50:43 PM

Title: Translite glass thickness
Post by: 4_amusement_only on January 07, 2013, 02:50:43 PM

Hi all, need to replace a Bally Black Rosé translite glass, I need the exact factory dimensions if somebody could please get the measuring tape across it for me. L x w x d

Dimensions would be the same for the following games.

Game show.
Radical
Pool sharks
Gilligan's island
Dr dude
Party zone
Harley Davidson

Title: Re: Translite glass thickness
Post by: millsy on January 07, 2013, 06:35:28 PM

Pool Sharks is 27 inches wide and 23 -1/2 inches high if this helps.

Title: Re: Translite glass thickness
Post by: 4_amusement_only on January 07, 2013, 09:03:03 PM

Thanks milsy..I also need its thickness which is most important so I can lock it up without breaking the glass again  #@#

Title: Re: Translite glass thickness
Post by: millsy on January 07, 2013, 09:41:53 PM

Cant find my micrometer  ^&^
This is all I could find - it is to scale.  !@#

Title: Re: Translite glass thickness
Post by: millsy on January 07, 2013, 09:51:59 PM

This may be easier to view (to scale)
http://pinballaustralia.com/thick.jpg (http://pinballaustralia.com/thick.jpg)

Title: Re: Translite glass thickness
Post by: 4_amusement_only on January 12, 2013, 07:17:36 PM

Okay thank you for that